TP-Link Archer A54 Archer A54US V1.6 User Guide - Page 23
IGMP Internet Group Management Protocol is used to manage, or Static IP. Click
![]() |
View all TP-Link Archer A54 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Chapter 4 Configure the Router in Wireless Router Mode • ISP Specified IP Address - If your ISP does not automatically assign IP addresses to the router, please select Use IP address specified by ISP and enter the IP address provided by your ISP in dotted-decimal notation. • Detect Online Interval - The router will detect Access Concentrator online at every interval. The default value is 0. You can input the value between 0 and 120. The value 0 means no detect. • Primary DNS/Secondary DNS - If your ISP does not automatically assign DNS addresses to the router, please select Set DNS server manually and enter the IP address in dotted-decimal notation of your ISP's primary DNS server. If a secondary DNS server address is available, enter it as well. L2TP If your ISP provides L2TP connection, please select L2TP. • Username/Password - Enter the user name and password provided by your ISP. These fields are case-sensitive. • Addressing Type - Choose the addressing type given by your ISP, either Dynamic IP or Static IP. Click the Connect button to connect immediately. Click the Disconnect button to disconnect immediately. • MTU(Bytes) - The default MTU size is "1460" bytes, which is usually fine. It is not recommended that you change the default MTU Size unless required by your ISP. • Enable IGMP Proxy - IGMP (Internet Group Management Protocol) is used to manage multicasting on TCP/IP networks. Some ISPs use IGMP to perform remote configuration 18
![](/manual_guide/products/tplink-archer-a54-archer-a54us-v16-user-guide-8582384/23.png)