Home » TP-Link Manuals » Bridges & Routers » TP-Link Archer A54 » Manual Viewer

TP-Link Archer A54 Archer A54US V1.6 User Guide - Page 19

Quick Setup, The current WAN Internet IP Address. This field will be blank

Add to My Manuals
Save this manual to your list of manuals

Page 19 highlights

Chapter 4 Configure the Router in Wireless Router Mode • Name(SSID) - The SSID of the Router. • Mode - The current wireless mode which the router works on. • Channel - The current wireless channel in use. • Channel Width - The current wireless channel width in use. • MAC Address - The physical address of the router. • WAN - This field displays the current settings of the WAN, and you can configure them on the Network > WAN page. • MAC Address - The physical address of the WAN port. • IP Address - The current WAN (Internet) IP Address. This field will be blank or 0.0.0.0 if the IP Address is assigned dynamically and there is no internet connection. • Subnet Mask - The subnet mask associated with the WAN IP Address. • Default Gateway - The Gateway currently used is shown here. When you use Dynamic IP as the internet connection type, click Renew or Release here to obtain new IP parameters dynamically from the ISP or release them. • DNS Server - The IP addresses of DNS (Domain Name System) server. • Ethernet - This field displays the current settings of the WAN and LAN ports. • Internet - This shows whether the WAN (Internet) port of the router is connected. • LAN1/LAN2/LAN3/LAN4 - This shows whether the LAN port is connected to a powered-on device and the negotiation speed of the LAN port. • System Up Time - The length of the time since the router was last powered on or reset. Click Refresh to get the latest status and settings of the router. 4. 2. Quick Setup 1. Visit http://tplinkwifi.net, and log in with the password you set for the router. 2. Go to Quick Setup. 3. Click Next to start. Then follow the step-by-step instructions to connect your router to the internet. 14

Section	Page
About This Guide	6
Get to Know About Your Router	7
1. 1. Product Overview	8
1. 2. Panel Layout	8
1. 2. 1. Top View	8
1. 2. 2. The Back Panel	9
Connect to the Internet	11
2. 1. Position Your Router	12
2. 2. Connect Your Router	12
Log In	15
Configure the Router in Wireless Router Mode	17
4. 1. Status	18
4. 2. Quick Setup	19
4. 3. Operation Mode	20
4. 4. Network	20
4. 4. 1. WAN	20
4. 4. 2. LAN	26
4. 4. 3. IPTV	27
4. 4. 4. MAC Clone	27
4. 5. Dual Band Selection	28
4. 6. Wireless (2.4GHz or 5GHz)	28
4. 6. 1. Wireless Settings	28
4. 6. 2. WPS	29
4. 6. 3. Wireless Security	31
4. 6. 4. Wireless Schedule	33
4. 6. 5. Wireless MAC Filtering	33
4. 6. 6. Wireless Advanced	35
4. 6. 7. Wireless Statistics	36
4. 7. Guest Network	36
4. 8. DHCP	38
4. 8. 1. DHCP Settings	38
4. 8. 2. DHCP Client List	39
4. 8. 3. Address Reservation	39
4. 9. Forwarding	40
4. 9. 1. Virtual Server	40
4. 9. 2. Port Triggering	42
4. 9. 3. DMZ	42
4. 9. 4. UPnP	43
4. 10. Security	44
4. 10. 1. Basic Security	44
4. 10. 2. Advanced Security	46
4. 11. Parental Controls	47
4. 12. Access Control	48
4. 13. Advanced Routing	51
4. 13. 1. Static Route List	51
4. 13. 2. System Routing Table	52
4. 14. Bandwidth Control	52
4. 14. 1. Control Settings	52
4. 14. 2. Rule List	53
4. 15. IP & MAC Binding	54
4. 15. 1. Binding Settings	54
4. 15. 2. ARP List	55
4. 16. Dynamic DNS	56
4. 17. IPv6	58
4. 17. 1. IPv6 Status	58
4. 17. 2. IPv6 WAN	59
4. 17. 3. IPv6 LAN	63
4. 18. System Tools	64
4. 18. 1. Time Settings	64
4. 18. 2. LED Control	65
4. 18. 3. Feedback	65
4. 18. 4. Diagnostic	66
4. 18. 5. Firmware Upgrade	67
4. 18. 6. Factory Defaults	68
4. 18. 7. Backup & Restore	68
4. 18. 8. Reboot	69
4. 18. 9. Password	69
4. 18. 10. Local Management	70
4. 18. 11. Remote Management	71
4. 18. 12. System Log	72
4. 18. 13. Statistics	72
4. 19. Log Out	73
Configure the Router in Access Point Mode	74
5. 1. Status	75
5. 2. Quick Setup	76
5. 3. Operation Mode	76
5. 4. Network	77
5. 5. Dual Band Selection	78
5. 6. Wireless (2.4GHz or 5GHz)	78
5. 6. 1. Wireless Settings	78
5. 6. 2. WPS	79
5. 6. 3. Wireless Security	81
5. 6. 4. Wireless Schedule	83
5. 6. 5. Wireless MAC Filtering	83
5. 6. 6. Wireless Advanced	85
5. 6. 7. Wireless Statistics	86
5. 6. 8. Throughput Monitor	86
5. 7. Guest Network	87
5. 8. DHCP	88
5. 8. 1. DHCP Settings	88
5. 8. 2. DHCP Client List	90
5. 8. 3. Address Reservation	90
5. 9. System Tools	91
5. 9. 1. Time Settings	91
5. 9. 2. LED Control	92
5. 9. 3. Feedback	92
5. 9. 4. Diagnostic	93
5. 9. 5. Firmware Upgrade	94
5. 9. 6. Factory Defaults	95
5. 9. 7. Backup & Restore	95
5. 9. 8. Reboot	96
5. 9. 9. Password	96
5. 9. 10. Local Management	97
5. 9. 11. System Log	98
5. 9. 12. Statistics	98
5. 10. Log Out	99
Configure the Router in Range Extender Mode	100
6. 1. Status	101
6. 2. Quick Setup	102
6. 3. Operation Mode	102
6. 4. Network	103
6. 5. Wireless (2.4GHz or 5GHz)	104
6. 5. 1. Connect to Network	104
6. 5. 2. Extended Network	105
6. 5. 3. Wireless Schedule	105
6. 5. 4. Wireless MAC Filtering	106
6. 5. 5. Wireless Advanced	107
6. 5. 6. Wireless Statistics	109
6. 6. DHCP	109
6. 6. 1. DHCP Settings	109
6. 6. 2. DHCP Client List	110
6. 7. System Tools	111
6. 7. 1. Time Settings	111
6. 7. 2. LED Control	112
6. 7. 3. Feedback	112
6. 7. 4. Diagnostic	113
6. 7. 5. Firmware Upgrade	114
6. 7. 6. Factory Defaults	115
6. 7. 7. Backup & Restore	115
6. 7. 8. Reboot	116
6. 7. 9. Password	116
6. 7. 10. Local Management	117
6. 7. 11. System Log	118
6. 8. Log Out	118