TP-Link Archer A54 Archer A54US V1.6 User Guide - Page 62

PPPoEv6, Enable MLD Proxy, PPP Username/Password, Authentication Type, Addressing Type, MTUBytes

Get TP-Link Archer A54 PDF manuals and user guides View all TP-Link Archer A54 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 62 highlights

Chapter 4 Configure the Router in Wireless Router Mode MTU. But this is rarely required, and should not be done unless you are sure it is necessary for your ISP connection. • Enable MLD Proxy - Enable the Multicast Listener Discovery (MLD) Proxy function if you need. PPPoEv6 • PPP Username/Password - Enter the user name and password provided by your ISP. These fields are case-sensitive. • Authentication Type - Choose one authentication type from AUTO-AUTH, PAP, CHAP and MS-CHAP. • Addressing Type - There are two types of assignation for IPv6 address: SLAAC (Stateless address auto-configuration) and DHCPv6 (Dynamic Host Configuration Protocol for IPv6) Server. • MTU(Bytes) - The normal MTU (Maximum Transmission Unit) value for most Ethernet networks is 1500 Bytes. For some ISPs, you may need to modify the MTU. But this is rarely required, and should not be done unless you are sure it is necessary for your ISP connection. • Enable MLD Proxy - Enable the Multicast Listener Discovery (MLD) Proxy function if you need. • Use IPv6 address specified by ISP - Input a static IPv6 address from the ISP. • Set IPv6 DNS Server manually - Enter the IP address of the IPv6 DNS server and secondary IPv6 DNS server. 57

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
57
Chapter 4
Configure the Router in Wireless Router Mode
MTU. But this is rarely required, and should not be done unless you are sure it is
necessary for your ISP connection.
•
Enable MLD Proxy
- Enable the Multicast Listener Discovery (MLD) Proxy
function if you need.
PPPoEv6
•
PPP Username/Password
- Enter the user name and password provided by
your ISP. These fields are case-sensitive.
•
Authentication Type
– Choose one authentication type from AUTO-AUTH, PAP,
CHAP and MS-CHAP.
•
Addressing Type
- There are two types of assignation for IPv6 address:
SLAAC (Stateless address auto-configuration) and DHCPv6 (Dynamic Host
Configuration Protocol for IPv6) Server.
•
MTU(Bytes)
- The normal MTU (Maximum Transmission Unit) value for most
Ethernet networks is 1500 Bytes. For some ISPs, you may need to modify the
MTU. But this is rarely required, and should not be done unless you are sure it is
necessary for your ISP connection.
•
Enable MLD Proxy
- Enable the Multicast Listener Discovery (MLD) Proxy
function if you need.
•
Use IPv6 address specified by ISP
- Input a static IPv6 address from the ISP.
•
Set IPv6 DNS Server manually
- Enter the IP address of the IPv6 DNS server
and secondary IPv6 DNS server.