TP-Link Archer A54 Archer A54US V1.6 User Guide - Page 70
Local Management, entry. The format of the MAC address is XX:XX:XX:XX:XX:XX
![]() |
View all TP-Link Archer A54 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Chapter 4 Configure the Router in Wireless Router Mode 3. Enter the old password and new password twice to change the login password. 4. Click Save. Note: The new password must not exceed 32 characters and not include any spacing. 4. 18. 10. Local Management 1. Visit http://tplinkwifi.net, and log in with the password you set for the router. 2. Go to System Tools > Administrator and locate the Service Configuration section. • Allow all LAN conencted devices to manage the router locally 1. Keep the Available Host (IP/MAC) empty, which means you don't specify any host to manage the router. 2. If you want to access the router via both HTTPS and HTTP, please tick the Enable checkbox in HTTPS Service column. Otherwise, keep it disbled. 3. Keep the local management port as default if you don't know which port to use. 4. Click Save. Note: If the web management port conflicts with the one used for Virtual Server entry, the entry will be automatically disabled after the setting is saved. • Allow a specific device to manage the router 1. Enter the IP or MAC address of the host that you want to manage the router in the Available Host (IP/MAC) entry. The format of the MAC address is XX:XX:XX:XX:XX:XX (X is any hexadecimal digit). 2. If you want to access the router via both HTTPS and HTTP, please tick the Enable checkbox in HTTPS Service column. Otherwise, keep it disbled. 3. Keep the local management port as default if you don't know which port to use. 4. Click Save. Note: If your PC is blocked but you want to access the router again, press and hold the Reset button to reset the router to the factory defaults. 65
![](/manual_guide/products/tplink-archer-a54-archer-a54us-v16-user-guide-8582384/70.png)