Home » TP-Link Manuals » Bridges & Routers » TP-Link Archer A54 » Manual Viewer

TP-Link Archer A54 Archer A54US V1.6 User Guide - Page 78

Dual Band Selection, 5. 6. Wireless (2.4GHz or 5GHz), 5. 6. 1. Wireless Settings, MAC Address

Add to My Manuals
Save this manual to your list of manuals

Page 78 highlights

Chapter 5 Configure the Router in Access Point Mode Note: If you select the type of smart IP(DHCP), the IP parameters will be automatically configured. And the DHCP server in this device will not startup. • MAC Address - The physical address of the LAN ports. The value can not be changed. • IP Address - Enter the IP address in dotted-decimal notation of your router. • Subnet Mask - An address code that determines the size of the network. Normally 255.255.255.0 is used as the subnet mask. Note: • If you change the IP address, you must use the new IP address to login to the Device. • If the new IP address you set is not in the same subnet with the previous one, the IP Address pool in the DHCP server will be configured automatically. 5. 5. Dual Band Selection 1. Visit http://tplinkwifi.net, and log in with the password you set for the router. 2. Go to Dual Band Selection. 3. Select the working radio band as needed and click Save. 5. 6. Wireless (2.4GHz or 5GHz) 5. 6. 1. Wireless Settings 1. Visit http://tplinkwifi.net, and log in with the password you set for the router. 2. Go to Wireless > Basic Settings. 3. Configure the basic settings for the wireless network and click Save. 73

Section	Page
About This Guide	6
Get to Know About Your Router	7
1. 1. Product Overview	8
1. 2. Panel Layout	8
1. 2. 1. Top View	8
1. 2. 2. The Back Panel	9
Connect to the Internet	11
2. 1. Position Your Router	12
2. 2. Connect Your Router	12
Log In	15
Configure the Router in Wireless Router Mode	17
4. 1. Status	18
4. 2. Quick Setup	19
4. 3. Operation Mode	20
4. 4. Network	20
4. 4. 1. WAN	20
4. 4. 2. LAN	26
4. 4. 3. IPTV	27
4. 4. 4. MAC Clone	27
4. 5. Dual Band Selection	28
4. 6. Wireless (2.4GHz or 5GHz)	28
4. 6. 1. Wireless Settings	28
4. 6. 2. WPS	29
4. 6. 3. Wireless Security	31
4. 6. 4. Wireless Schedule	33
4. 6. 5. Wireless MAC Filtering	33
4. 6. 6. Wireless Advanced	35
4. 6. 7. Wireless Statistics	36
4. 7. Guest Network	36
4. 8. DHCP	38
4. 8. 1. DHCP Settings	38
4. 8. 2. DHCP Client List	39
4. 8. 3. Address Reservation	39
4. 9. Forwarding	40
4. 9. 1. Virtual Server	40
4. 9. 2. Port Triggering	42
4. 9. 3. DMZ	42
4. 9. 4. UPnP	43
4. 10. Security	44
4. 10. 1. Basic Security	44
4. 10. 2. Advanced Security	46
4. 11. Parental Controls	47
4. 12. Access Control	48
4. 13. Advanced Routing	51
4. 13. 1. Static Route List	51
4. 13. 2. System Routing Table	52
4. 14. Bandwidth Control	52
4. 14. 1. Control Settings	52
4. 14. 2. Rule List	53
4. 15. IP & MAC Binding	54
4. 15. 1. Binding Settings	54
4. 15. 2. ARP List	55
4. 16. Dynamic DNS	56
4. 17. IPv6	58
4. 17. 1. IPv6 Status	58
4. 17. 2. IPv6 WAN	59
4. 17. 3. IPv6 LAN	63
4. 18. System Tools	64
4. 18. 1. Time Settings	64
4. 18. 2. LED Control	65
4. 18. 3. Feedback	65
4. 18. 4. Diagnostic	66
4. 18. 5. Firmware Upgrade	67
4. 18. 6. Factory Defaults	68
4. 18. 7. Backup & Restore	68
4. 18. 8. Reboot	69
4. 18. 9. Password	69
4. 18. 10. Local Management	70
4. 18. 11. Remote Management	71
4. 18. 12. System Log	72
4. 18. 13. Statistics	72
4. 19. Log Out	73
Configure the Router in Access Point Mode	74
5. 1. Status	75
5. 2. Quick Setup	76
5. 3. Operation Mode	76
5. 4. Network	77
5. 5. Dual Band Selection	78
5. 6. Wireless (2.4GHz or 5GHz)	78
5. 6. 1. Wireless Settings	78
5. 6. 2. WPS	79
5. 6. 3. Wireless Security	81
5. 6. 4. Wireless Schedule	83
5. 6. 5. Wireless MAC Filtering	83
5. 6. 6. Wireless Advanced	85
5. 6. 7. Wireless Statistics	86
5. 6. 8. Throughput Monitor	86
5. 7. Guest Network	87
5. 8. DHCP	88
5. 8. 1. DHCP Settings	88
5. 8. 2. DHCP Client List	90
5. 8. 3. Address Reservation	90
5. 9. System Tools	91
5. 9. 1. Time Settings	91
5. 9. 2. LED Control	92
5. 9. 3. Feedback	92
5. 9. 4. Diagnostic	93
5. 9. 5. Firmware Upgrade	94
5. 9. 6. Factory Defaults	95
5. 9. 7. Backup & Restore	95
5. 9. 8. Reboot	96
5. 9. 9. Password	96
5. 9. 10. Local Management	97
5. 9. 11. System Log	98
5. 9. 12. Statistics	98
5. 10. Log Out	99
Configure the Router in Range Extender Mode	100
6. 1. Status	101
6. 2. Quick Setup	102
6. 3. Operation Mode	102
6. 4. Network	103
6. 5. Wireless (2.4GHz or 5GHz)	104
6. 5. 1. Connect to Network	104
6. 5. 2. Extended Network	105
6. 5. 3. Wireless Schedule	105
6. 5. 4. Wireless MAC Filtering	106
6. 5. 5. Wireless Advanced	107
6. 5. 6. Wireless Statistics	109
6. 6. DHCP	109
6. 6. 1. DHCP Settings	109
6. 6. 2. DHCP Client List	110
6. 7. System Tools	111
6. 7. 1. Time Settings	111
6. 7. 2. LED Control	112
6. 7. 3. Feedback	112
6. 7. 4. Diagnostic	113
6. 7. 5. Firmware Upgrade	114
6. 7. 6. Factory Defaults	115
6. 7. 7. Backup & Restore	115
6. 7. 8. Reboot	116
6. 7. 9. Password	116
6. 7. 10. Local Management	117
6. 7. 11. System Log	118
6. 8. Log Out	118