TP-Link Archer A54 Archer A54US V1.6 User Guide - Page 69
Reboot, 4. 18. 9. Password, Choose File, Restore, System Tools, Reboot, Disable, Timeout
View all TP-Link Archer A54 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Chapter 4 Configure the Router in Wireless Router Mode • To restore configuration settings: 1. Click Choose File to locate the backup configuration file stored in your computer, and click Restore. 2. Wait a few minutes for the restoring and rebooting. Note: During the restoring process, do not power off or reset the router. 4. 18. 8. Reboot 1. Visit http://tplinkwifi.net, and log in with the password you set for the router. 2. Go to System Tools > Reboot, and you can restart your router. 3. Enable the auto reboot function as needed. • Disable - Disable the auto reboot function. • Timeout - Specify a time period(1-72 hours), then the router will reboot automatically after every this interval. • Schedule - The router will reboot automatically according to a specific time schedule. Some settings of the router will take effect only after rebooting, including: • Change the LAN IP Address (system will reboot automatically). • Change the DHCP Settings. • Change the Working Modes. • Change the Web Management Port. • Upgrade the firmware of the router (system will reboot automatically). • Restore the router to its factory defaults (system will reboot automatically). • Update the configuration with the file (system will reboot automatically). 4. 18. 9. Password 1. Visit http://tplinkwifi.net, and log in with the password you set for the router. 2. Go to System Tools > Administrator and locate the Account Management section. 64