TP-Link Archer D20 Archer D20 V1 User Guide

TP-Link Archer D20 Manual

Get TP-Link Archer D20 PDF manuals and user guides View all TP-Link Archer D20 manuals
Add to My Manuals
Save this manual to your list of manuals

TP-Link Archer D20 manual content summary:

  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 1
    Archer D20 User Guide AC750 Wireless Dual Band ADSL2+ Modem Router REV1.1.0 1910011468
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 2
    Contents About This Guide 1 Chapter 1. Get to Know About Your Modem Router 14 4. 1. Use Quick Setup Wizard 15 4. 2. Manually Set up an Internet Connection Access Control 25 6. 3. IP & MAC Binding 27 Chapter 7. IPTV 29 Chapter 8. USB Settings 31 8. 1. Local Storage Sharing 32 8. 1. 1.Access
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 3
    Forwarding 56 11. 1. Share Local Resources in the Internet by Virtual Server 57 11. 2. Open Ports Dynamically by Port Triggering 58 11. 3. Make Applications Free from Port Settings 71 12. 3. Set Up a Dynamic DNS Service Account 73 12. 4. Interface Grouping 73 12. 5. Create Static Routes 75 12.
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 4
    Tunnel Service-6to4 81 12. 7. 2.Specify the 6rd Tunnel with Parameters Provided by Your ISP 82 Chapter 13. Administrate Your Network 84 13. 1. Set System Time and Region 85 13. 2. Update the Firmware 86 92 13. 10. SNMP Settings 94 Appendix A: Specifications 96 Appendix B: Troubleshooting 97
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 5
    for quick Internet setup by following the published Quick Installation Guide before you get started with a further configuration. Conventions In this guide the following conventions are used: Convention Description modem router/ router Stands for AC750 Wireless Dual Band ADSL2+ Modem Router
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 6
    Chapter 1 Get to Know About Your Modem Router This chapter introduces what the modem router can do and shows its main features and appearance. This chapter contains the following sections: • Product Overview • Main Features • Panel Layout
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 7
    Chapter 1 Get to Know About Your Modem Router 1. 1. Product Overview What This Product Does TP-LINK's Archer D20 AC750 Wireless Dual Band ADSL2+ Modem Router is a combined wired/wireless network connection device with integrated wireless router and ADSL modem, reducing hassle of configuration and
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 8
    Chapter 1 Get to Know About Your Modem Router IPv6 Supported Archer D20 supports IPv6, which is the foundation of the next generation of the Internet and enables a range of new services and improved user experience. 1. 2. Main Features • Supports 802.11ac - The next generation of Wi-Fi,
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 9
    Router • Supports firmware upgrade and Web management • Supports Virtual Server, DMZ host and Port Triggering • Supports Dynamic DNS, UPnP and Static Routing • Supports system log and flow Statistics • Supports IPv6 1. . ADSL synchronization failed. Please refer to Note 1 for troubleshooting. 5
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 10
    troubleshooting. The wireless 2.4GHz band is working properly. The wireless 2.4GHz band is disabled. The wireless 5GHz band is working properly. The wireless 5GHz band is disabled. At least one LAN port is connected. No LAN port your ISP to make sure your Internet service is available now. 2. If the
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 11
    modem router's back panel shows the connection ports, buttons and antennas. Refer to the following for detailed instructions. Item Description ADSL For connecting the modem router to the Internet. Connect the port to the splitter or directly connect the port to the phone jack via a phone cable
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 12
    Chapter 2 Connect the Hardware This chapter contains the following sections: • Position Your Modem Router • Connect Your Modem Router
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 13
    Your Modem Router With the modem router, you can access your network from anywhere within the wireless network coverage. However the actual environment where your modem router is in. Many obstacles may limit the range of the wireless signal, for example, concrete structures, thickness and number of
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 14
    port to the LAN port on the modem router Archer D20 via the Ethernet cable. Method 2: Wirelessly Use the default SSID (Wireless Network Name) and Wireless Password printed on the product label of the modem router to connect wirelessly. Method 3: Use the WPS button Wireless devices that support
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 15
    Chapter 2 Connect the Hardware 1 ) Tab the WPS icon on the device's screen. 2 ) Immediately press the WPS button on your modem router. 3 ) The WPS LED flashes for about two minutes during the WPS process. 4 ) When the WPS LED is on, the client device has successfully connected to the modem router.
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 16
    Chapter 3 Log into Your Modem Router
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 17
    based utility, it is easy to configure and manage the Archer D20 AC750 Wireless Dual Band ADSL2+ Modem Router. The Web-based utility can be password using 1-15 characters and click Save. 3. Enter the password you set and click Login. Note: For subsequent logins, you only need to enter the password
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 18
    steps have been successfully completed. Furthermore, you can also set up an IPv6 connection if your ISP provided IPv6 service. This chapter includes the following sections: • Use Quick Setup Wizard • Manually Set up an Internet Connection • Set up an IPv6 Connection • Test Internet Connectivity
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 19
    the Internet. Refer to Appendix B: Troubleshooting for details. 4. 2. Manually Set up an Internet Connection To manually add an Internet connection without following the instructions of the Quick Setup wizard: 1. Visit http://tplinkmodem.net, and log in with the password you set for the modem
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 20
    an IPv6 Connection If the DSL line your ISP provided also supports IPv6 connection and your ISP has provided some detailed IPv6 parameters, Configure the WAN settings. 1 ) Visit http://tplinkmodem.net, and log in with the password you set for the modem router. 2 ) Go to Advanced > Network > Internet
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 21
    SLAAC is the most commonly used addressing type. IPv6 Gateway: Keep the default setting as Current Connection. Note: If your ISP has provided the IPv6 Leave the rest of the settings as default. 3 ) Click Save to make the settings effective. 3. Done. IPv6 service is available for your network. 17
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 22
    4. 4. Test Internet Connectivity After manually setting up the Internet connection, you need to know the Internet connectivity. The modem router provides a diagnostic tool to help you locate the malfunction. 1. Visit http://tplinkmodem.net, and log in with the password you set for the modem router
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 23
    Chapter 5 Bandwidth Control The Bandwidth Control feature is used to fully utilize your limited bandwidth and optimize the load respectively. With this feature enabled, you can assign a specific minimum or maximum bandwidth for each computer, thus minimizing the impact caused when the connection is
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 24
    IP Addresses. 1. Visit http://tplinkmodem.net, and log in with the password you set for the modem router. 2. Go to Advanced > Bandwidth type, please contact your ISP which line type you have access. 4. EntertheTotalUpstreamBandwidthandtheTotalDownstream Bandwidth given by your ISP. (1Mbps=1024Kbps
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 25
    with this IP address will get independent given bandwidth. When you configure the IP address range, all computers in the range will share the given bandwidth. 2 ) Port Range: Keep the default settings. The default port range of TCP protocol or UDP protocol is from 1 to 65535. 3 ) Protocol: Keep the
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 26
    Chapter 5 Bandwidth Control Done! Now you and your roommate have an independent bandwidth. 22
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 27
    6 Network Security This chapter guides you on how to protect your home network from unauthorized users by implementing these three network security functions. You can block or allow specific client devices to access your wireless network using MAC Filtering, or using Access Control for wired and
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 28
    wireless network with the following capabilities: • My computer is always allowed to access the wireless network. • The unknown device is not allowed to access the wireless network. • I don't have to keep changing my wireless password as often. 1. Visit http://tplinkmodem.net, and log in with the
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 29
    Click Block above the Devices Online table. The selected devices will be added to Devices List automatically. To allow specific device(s) 1 ) Select Allow wireless access only from the devices in the list below and click Save. 2 ) Click Add. Done! 3 ) Enter the MAC Address (You can copy and paste
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 30
    How can I do that? Network Security 1. Visit http://tplinkmodem.net, and log in with the password you set for the router. 2. Go to Advanced > Security > Access Control and enable Access Control. 3. Select the access mode to either block (recommended) or allow the device(s) in the list. To block
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 31
    MAC address. This will prevent ARP spoofing and other ARP attacks by denying network access to an device with matching IP address in the Binding list, but unrecognized 1. Visit http://tplinkmodem.net, and log in with the password you set for the router. 2. Go to Advanced > Security > IP & MAC Binding
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 32
    Chapter 6 Network Security 3. Bind your device(s) according to your needs. To bind the connected device(s) 1 ) Select the device(s) to be bound in the ARP List. 2 ) Click Bind to add to the Binding List. To bind the unconnected device 1 ) Click Add. Done! 2 ) Enter the MAC Address and IP
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 33
    Chapter 7 IPTV IPTV is the abbreviation of Internet Protocol Television. The service can only be delivered through the Internet, and our modem router provides a specific LAN port for IPTV. By automatically seperating IPTV from Internet surfing, we guarantee you a high quality of video streaming and
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 34
    Protocol Television (IPTV) Services. For example, I already bought IPTV service, but this service can only be delivered through password you set for the router. 2. Go to Advanced > IPTV to open the configuration page. Done! 3. Click Enable IPTV to enable this function. 4. Specify a LAN port
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 35
    Chapter 8 USB Settings This chapter describes how to share and access USB devices connected to the modem router among different clients. The modem router only supports USB external flash drives, hard drives and USB printers, and does not support USB 3G/4G modems. This chapter contains the following
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 36
    disk. Refer to the following table for access instructions. You can also customize your sharing content and set a sharing account by referring to Customize Your Settings. ¾¾ Method 1: Go to Computer > Network, then click the Network Server Name (ARCHER _D20 by default) in the Computer section. Note
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 37
    2 ) Type the server address smb://tplinkmodem.net 3 ) Click Connect Mac 4 ) When prompted, select the Guest radio box. (If you have set up a username and a password to deny anonymous access to the USB disks, you should select the Registered User radio box. To learn how to set up an account for the
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 38
    Content By default, Share All is enabled so all content on the USB disk is shared. If you want to only share specific folders, follow the steps below: 1. Visit http://tplinkmodem.net, then log in with the password you set for the modem router. 2. Select Basic > USB Settings > Sharing Access. Focus
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 39
    the USB disk. 1. Visit http://tplinkmodem.net, then log in with the password you set for the modem router. 2. Select Advanced > USB Settings > Sharing Access. 3. Choose to use the default Account (admin) or use a new account and click Save. 4. Enable Authentication to apply the account
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 40
    Disk You can customize the server name and use the name to access your USB disk. 1. Visit http://tplinkmodem.net, then log in with the password you set for the modem router. 2. Select Advanced > USB Settings > Sharing Access. 3. Make sure Network Neighborhood is ticked, and enter a Network/Media
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 41
    you cannot use this feature because private addresses are not routed on the Internet. 8. 2. 1. Access the USB disk 1. Connect Your USB Disk Insert your USB storage device into the modem router's USB port directly or using a USB cable. Wait several seconds until the USB LED becomes solid on
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 42
    sharing account for data security. 1 ) Visit http://tplinkmodem.net, then log in with the password you set for the modem router. 2 ) Select Advanced > USB Settings > Sharing Access. 3 ) Choose to use the default Account (admin) or use a new account and click Save. 4 ) Enable Authentication to apply
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 43
    Chapter 8 USB Settings 3. Enable the FTP(via Internet) Select the check box to enable FTP(via Internet), then click Save. 4. Access Your USB Disk via Internet Now different clients with Internet connection can access the USB disk: 39
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 44
    modem router, you can also type in ftp://: (such as ftp:// MyDomainName:21) Computer The Address Bar the Windows Explorer (Windows 7) 3 ) Press Enter on the keyboard. 4 ) Access with the username and password you set in Step 2 Enable Authentication for Data Security. Tips
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 45
    like. 4. Tick Enable Authentication. If you allow network clients to modify this folder, tick Enable Write Access. 5. Click OK. Tips: The modem router can share eight volumes at most. You can click on the USB disk directly from DLNA-supported devices, such as your computer, pad and PS2/3/4. 41
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 46
    . 2. Access the Media Files on Your USB Disk Now the DLNA-supported devices ( such as your computer and pad) connected to the modem router can detect and play the media files on the USB disks. • Go to Computer > Network, then click the Media Server Name (Archer_D20 by default
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 47
    By default, Share All is enabled so all content on the USB disk is shared. If you want to only share specific folders, follow the steps below: 1. Visit http://tplinkmodem.net, then log in with the password you set for the modem router. 2. Select Basic > USB Settings > Sharing Access. 3. Focus
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 48
    log in with the password you set for the modem router. 2. Select Advanced > USB Settings > Sharing Access. 3. Enter a tp-link.com/common/compatible/print-server/. 1. Install the Driver of the Printer Make sure you have installed the driver of the printer on each computer that needs printer service
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 49
    , then click TP-LINK USB Printer Controller Setup (for Windows users) or TP-Link UDS Printer Controller Installer (for Mac users) to install the utility. 4. Access the Printer You should set the shared printer as Auto-Connect Printer on every computer that needs printer service. 1 ) Double-click
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 50
    Chapter 8 USB Settings Mac 3 ) Click the Auto-Connect for printing tab to pull down a list, then select Set Auto- Connect Printer. Windows Mac 4 ) Select the printer you share, then click Apply. 46
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 51
    Chapter 8 USB Settings Windows Mac 5 ) You will see the printer marked as Auto-Connect Printer. Now you can print with this printer. 47
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 52
    Server also allows different clients to share the scan feature of MFPs (Multi-Function Printers). To scan with TP-LINK USB Printer Controller, right-click the printer and select Network Scanner. Then, a scanning window will pop up. Finish the scanning process by following on-screen instructions. 48
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 53
    Chapter 9 Parental Controls This function allows you to block inappropriate, explicit and malicious websites, and control access to specified websites at specified time.
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 54
    , I want to allow my children's devices (e.g. a computer or a tablet) to access only www.tp-link.com and Wikipedia.org from 18:00 (6PM) to 22:00 (10PM) on weekdays and not other time. 1. Visit http://tplinkmodem.net, and log in with the password you set for the router. 2. Go to Basic or Advanced
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 55
    4. Click View Existing Devices, and select the device to be controlled. Or, enter the Device Name and MAC Address manually. 5. Click the icon to set the Internet Access Time. Drag the cursor over the appropriate cell(s) and click OK. 6. Enter a Description for the entry. 7. Select the checkbox
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 56
    to 200 keywords for both Blacklist and Whitelist. Below are some sample entries to allow access. 1 ) Enter a web address (e.g. www.tp-link.com) or a web address keyword (e.g. wikipedia) to only allow or block access to the websites containing that keyword. 2 ) Specify the domain suffix (eg. .edu or
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 57
    Chapter 10 Guest Network This function allows you to provide Wi-Fi access for guests without disclosing your main network. When you have guests in your house, apartment, or workplace, you can create a guest network for them. In
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 58
    unless you want your guests and other people to manually input this SSID for Wi-Fi access. 3 ) Set Security to WPA/WPA2 Personal, keep the default Version and Encryption values, and set an easy-to-remember password. 4. Click Save. Now your guests can access your guest network using the SSID and
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 59
    to allow the clients in your guest network to access each other. • Allow guests to access my local network Select this checkbox to allow the clients in your Select this checkbox to allow the clients in your guest network to access your router's USB storage sharing. • Enable guest network bandwidth
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 60
    about the problem that external host cannot initiatively communicate with the specified device in the local network. With forwarding feature the TP-LINK modem router includes four forwarding rules. If two or more rules are set, the priority of implementation from high to low is Virtual Servers, Port
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 61
    service uses different service port. Port 80 is used in HTTP service, port 21 in FTP service, port 25 in SMTP service and port 110 in POP3 service. Please verify the service port in with the password you set for the modem router. 3. Go to Advanced > NAT Forwarding > Virtual Servers, click Add. 57
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 62
    to keep the default settings of Internal Port and Protocol if you are not clear about which port and protocol to use. 2. If the service you want to use is not in the Service Type, you can enter the corresponding parameters manually. You should verify the port number that the service needs. 3. You
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 63
    port triggering rules: 1. Visit http://tplinkmodem.net, and log in with the password you set for the modem router. 2. Go to Advanced > NAT Forwarding > Port the parameters manually. You should verify the external ports the application uses first and enter them into External Port field according
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 64
    players. To solve this problem, set your PC as a DMZ with all ports opened. 1. Assign a static IP address to your PC, for example 192.168.1.100. 2. Visit http://tplinkmodem.net, and log in with the password you set for the modem router. 3. Go to Advanced > NAT Forwarding > DMZ and select the
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 65
    Forwarding to use applications for multiplayer gaming, peer-to-peer connections, real-time communication (such as VoIP or telephone conference) or remote assistance, etc. Tips: 1. UPnP is enabled by default in this modem router. 2. Only the application supporting the corresponding ports allowing the
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 66
    introduces how to change the default settings or adjust the basic configuration of the modem router using the web-based management page. This chapter contains the following sections: • LAN Settings • Wireless Settings • Set Up a Dynamic DNS Service Account • Interface Grouping • Create Static
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 67
    change your IP address. 1. Visit http://tplinkmodem.net, and log in with the password you set for the modem router. 2. Go to Advanced > Network > LAN for LAN interface through which you can also access the web management page. 7. Leave the rest of the default settings as they are. 8. Click Save
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 68
    and log in with the password you set for the modem default is 1440 minutes. 6. Keep the rest of the settings as default forwarded to the DHCP server that runs on WAN side. 2. You can also appoint IP addresses within a specified range accesses the DHCP server. If there are some devices in the LAN
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 69
    for the purpose. Follow the steps below to reserve an IP address for your device. 1. Visit http://tplinkmodem.net, and log in with the password you set for the modem router. 2. Go to Advanced > Network > LAN Settings page and select IPv4. 3. Scroll down to locate the Address Reservation table
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 70
    password: Enter a new SSID using up to 32 characters. The default SSID is TP-LINK_XXXX password for future use. ¾¾ To hide SSID: Select Hide SSID, and your SSID will not broadcast. Your SSID won't display when you scan for local wireless network list on your wireless device and you need to manually
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 71
    interference problems with another nearby access point. Channel Width: Select the channel width from the drop-down list. The default setting quickly. Method 1 Use the Wi-Fi Protected Setup Button Use this method if your client device has a Wi-Fi Protected Setup button. 1. Press the WPS/RESET button
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 72
    wireless network 2.4GHz or 5GHz according to your wireless client. 3. Keep the default WPS status as Enabled and select the PIN Code radio button. 4. Enter the router's PIN. 1. Visit http://tplinkmodem.net, and log in with the password you set for the modem router. 2. Go to Advanced > Wireless >
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 73
    new PIN. 4. On the client device, enter the modem router's PIN. (The default PIN is also labeled on the bottom of the modem router.) 5. The WPS the wireless connection. 1. Visit http://tplinkmodem.net, and log in with the password you set for the modem router. 2. Go to Advanced > Wireless >
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 74
    5. Repeat steps 3 and 4 to set time for 5GHz wireless network. Note: 1. If you just set time for one wireless band, the other wireless band is wireless network settings: 1. Visit http://tplinkmodem.net, and log in with the password you set for the modem router. 2. Go to Advanced > Status page.
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 75
    the detailed information of the wireless clients, including its connected wireless band and security option as well as the packets transmitted. Tips: default values; otherwise it may result in lower wireless network performance. 1. Visit http://tplinkmodem.net, and log in with the password you
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 76
    the WDS (Wireless Distribution System) Bridging feature to allow the router to bridge with another access point (AP) in a wireless local area network (WLAN). Refer T7. How to use the WDS Bridging function to extend my wireless network? under Appendix B: Troubleshooting for detailed instructions. 72
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 77
    feature on the router to allow you and your friends to access your router and local servers (FTP, HTTP, etc.) using instructions below: 1. Visit http://tplinkmodem.net, and log in with the password you set for the modem router. 2. Go to Advanced > Network > Dynamic DNS. 3. Select the DDNS service
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 78
    Chapter 12 How can I do that? Specify Your Network Settings 1. Visit http://tplinkmodem.net, and log in with the password you set for the modem router. 2. Go to Advanced > Network > Interface Grouping to open the configuration page where some interfaces can be grouped together. 3. Click
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 79
    isolated group! Note: VLAN function is enabled by default. You cannot disable it when IPTV is enabled. specific host or network. Data from one point to another will always follow the same Visit http://tplinkmodem.net, and log in with the password you set for the modem router. 3. Go to Advanced
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 80
    on the same subnet with the router's IP which sends out the data. In the example, the data packets will be sent to the LAN port of 76
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 81
    that the modem router in my office and the device in headquarter both support IPSec VPN feature, so I decide to set up a VPN connection with the headquarter office. The following diagram is a typical VPN topology. Here Site A refers to regional office's network (local network). And Site B refers
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 82
    A (local network) and site B (remote network)'s LAN IP and WAN IP. 2. Configuration on site A (local network). 1 ) Visit http://tplinkmodem.net, and log in with the password you set for the modem router. 2 ) Go to Advanced > Network > IPSec VPN to open the configuration page. Click Add to set up
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 83
    addresses column, here we take Subnet Address as an example. Then input the LAN IP range of Site A in the IP Address for VPN column, and input Subnet Mask of Site A. 6 ) To configure Site B's LAN: In the Tunnel access from local IP addresses column, here we take Subnet Address as an example. Then
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 84
    as default value. Then click OK to save. 3. Configuration on Site B (remote network). Refer to step 2 configuration on Site A and make sure that Site A and Site B use the same pre-shared keys and Perfect Forward Secrecy settings. 4. The Status column will change to UP if the VPN connection
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 85
    IPSec VPN is implemented to establish a connection. Note: 1. The product supports a networks that do not support native dual-stack, where both IPv6 Service-6to4 The 6to4 tunnel is a kind of public service. If there is any 6to4 server in your network, you can use this mechanism to access IPv6 service
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 86
    provide me with the tunnel service. 1. Visit http://tplinkmodem.net, and log in with the password you set for the modem tunnel. Note: Still not being able to access IPv6 resources means that not any 6to4 public server Manual. More parameters are needed if you choose Manual. 5. Click Save. 82
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 87
    is similar to that of 6rd tunnel. If you are provided with an IPv6-only WAN connection and have signed up for DS-Lite tunnel service, specify the DS-Lite tunnel by referring to the steps above. 83
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 88
    settings and administrate your modem router's network. This chapter contains the following sections: • Set System Time and Region • Update the Firmware • Back up and Restore Configuration Settings • Change the Administrator Account • Local Management • Remote Management • System Log • Monitor the
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 89
    Parental Controls and Wireless Schedule. You can manually set how to get the system time. Visit http://tplinkmodem.net, and log in with the password you set for the modem router. 2. Go to Advanced the Internet. Make sure your modem router can access the Internet before you select this way to get
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 90
    file from our website: www.tp-link.com and upgrade the firmware to the latest version. Follow the steps below to update your firmware to the latest. 1. Download the latest firmware file from our website: www.tp-link.com. 2. Visit http://tplinkmodem.net, and log in with the password you set for the
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 91
    will automatically reboot. To reset the modem router to factory default settings: 1. Visit http://tplinkmodem.net, and log in with the password you set for the modem router. 2. Click Advanced > System are required to set the admin account at first login. You can also change it on the web page. 87
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 92
    the local management. 1. Visit http://tplinkmodem.net, and log in with the password you set for the modem router. 2. Go to Advanced > System Tools > Administration page. Locate the Local Management section. 3. Keep the Port as the default setting. Enter the IP Address or MAC Address of the local
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 93
    example when your modem router does not work properly, you will need to save the system log and send it to the technical support for troubleshooting. 1. Visit http://tplinkmodem.net, and log in with the password you set for the modem router. 2. Click Advanced > System Tools > System Log page. 89
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 94
    Chapter 13 Administrate Your Network To view the system logs: 1. Select the log Type. Select ALL to view all kinds of logs, or select DHCPD or IGMP to view the specific logs. 2. Select the log Level and you will see the logs with the specific or higher levels. 3. Click Refresh to refresh the
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 95
    sent and received packets, allowing you to monitor the volume of Internet traffic statistics. 1. Visit http://tplinkmodem.net, and log in with the password you set for the modem router. 2. Go to Advanced > System Tools > Statistics. 3. Toggle on Traffic Statistics, and then you can monitor the
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 96
    modem router offers CWMP feature. The function supports TR-069 protocol which collects information, diagnoses the devices and configures the devices automatically via ACS (Auto-Configuration Server). 1. Visit http://tplinkmodem.net, and log in with the password you set for the modem router. 2. Go
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 97
    will be sent to the ACS. • ACS URL: Enter the web address of the ACS which is provided by your ISP. • ACS Username/Password: Enter the username/password to log in to the ACS server. • Interface used by TR-069 client: Select which interface to be used by the TR-069 client
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 98
    Port: Enter the port that connects to the ACS server. • Connection Request URL: Enter the URL that connects to the ACS server. • Get RPC methods: Click to get the methods to support . 1. Visit http://tplinkmodem.net, and log in with the password you set for the modem router. 2. Go to Advanced >
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 99
    , and triggering SNMP traps when an event occurs. • Read-only Community: Displays the default public community string that protects the router from unauthorized access. • Set Community: Displays the default read and write community string that protects the router from unauthorized changes. • System
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 100
    (Auto MDI/MDIX) One RJ11 port One USB 2.0 port Network Medium Data Rates Antennas 10Base-T: UTP category 3, 4, 5 cable 100Base-TX: UTP category-5, 5e cable Max line length: 6.5Km Downstream: Up to 24Mbps Upstream: Up to 1Mbps Two undetachable external dual band antennas, 2dBi for 2.4GHz and 3dBi
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 101
    password? Web Management page password: Restore the modem router to its factory default settings and then set a new password using 1-15 characters. Wireless Network password: 1. The default Wireless Password address automatically. • Make sure the default access you input is right. • Check your
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 102
    4 ) Click LAN settings, deselect the following three options and click OK; 5 ) Go to Advanced > Restore advanced settings, click OK to save the settings. 98
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 103
    Reset the modem router to factory default settings: With the modem router in again. If login fails, please contact the technical support. T4. What can I do if I cannot access the Internet? 1. and then try to see if you can access the Internet. If the problem persists, please go to the next step.
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 104
    access the Internet, please restore your modem router to its factory default settings and reconfigure your modem router by following the instructions in Use Quick Setup Wizard. 6. Please contact our Technical Support if the problem still exists. T5. How to configure MAC Clone? You can manually
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 105
    , and log in with password you set for the modem router. 3. Go to Advanced > Operation Mode page. 4. Select theWireless Router Mode option and click Save to make the settings effective. Note: IPTV function is not supported in Wireless Router Mode. T7. How to use the WDS Bridging function to extend
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 106
    to enjoy the network. Note: The extended router (modem router) can have different SSID and password from the root router, you can change your modem router's SSID and password on Basic > Wireless page. T8. What can I do if I cannot find my wireless network or I cannot connect the wireless network
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 107
    blocked somehow; 2 ) Clicking on Troubleshoot and windows might be able to fix the problem by itself. On Windows XP 1 TP-LINK Utility, for example); 3 ) Select and right click on My Computer on desktop, select Manage to open Computer Management window; 4 ) Expand Services and Applications > Services
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 108
    5 ) Select Wireless Zero Configuration, right click, and then select Properties; 6 ) Change Startup type to Automatic, click on Start button and make sure the Service status is Started. And then click OK. 104
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 109
    wireless router/modem; 2. Make sure your computer/device is still in the range of your router/modem, move closer if it is currently too far away; network but fail to connect, please follow the steps below: 1. Authenticating problem, password mismatch. 1 ) Sometimes it will ask you to type in a
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 110
    ; 3 ) If it continues on saying network security key mismatch, it is suggested to confirm the wireless password on your wireless router/modem; Note: Wireless password/Network Security Key is case sensitive. 4 ) Connect to wireless network. 2. Windows was unable to connect to XXXX /Cannot join
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 111
    Windows account name, Windows will be unable to remember the password you set for the USB. To solve this problem, you can set a different USB access username or make the USB access password the same as your Windows account. After you modify the access account, remember to log off (sigh out) from the
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 112
    COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 113
    installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 114
    5.15 ~ 5.25GHz / 5.745 ~ 5.85 GHz frequency range. It is restricted in indoor environment only. This device meets lesund on Svalbard The public use is subject to general authorisation by the respective service provider Limited implementation 1. SRD with FHSS modulation 1.1. Maximum 2.5 mW e.i.r.p.
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 115
    and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. Avertissement: Le dispositif fonctionnant dans la bande 5150-5250 MHz est réservé uniquement pour une utilisation à l'intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 116
    Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. Industry
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 117
    the risk of electric shock and voiding the limited warranty. If you need service, please contact us. • Avoid water and wet locations. • Adapter shall be installed near the equipment and shall be easily accessible. • The plug considered as disconnect device of adapter. Use only power supplies which
  • TP-Link Archer D20 | Archer D20 V1 User Guide - Page 118
    Description: AC750 Wireless Dual Band ADSL2+ Modem Router Model No.: Archer D20 Trademark: TP-LINK We declare above product is in conformity with the following standards or other normative documents EN 300 328 V1.8.1 EN 301 489-1 V1.9.2 & EN 301 489-17 V2.2.1 EN 55022: 2010 + AC: 2011 EN 55024
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
REV1.1.0
1910011468
Archer D20
User Guide
AC750 Wireless Dual Band
ADSL2+ Modem Router