TP-Link Archer D20 Archer D20 V1 User Guide - Page 105
T7° How to use the WDS Bridging function to extend my wireless, network?, Advanced, Operation Mode
View all TP-Link Archer D20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
2. Visit http://tplinkmodem.net, and log in with password you set for the modem router. 3. Go to Advanced > Operation Mode page. 4. Select theWireless Router Mode option and click Save to make the settings effective. Note: IPTV function is not supported in Wireless Router Mode. T7. How to use the WDS Bridging function to extend my wireless network? My house covers a large area. The wireless network coverage of the router I'm using (the root router) is limited. I want to use an extended router to extend the wireless network of the primary router. Follow the steps to configure the modem router. 1. Visit http://tplinkmodem.net, and log in with password you set for the modem router. 2. Configure the LAN IP address of the modem router in the same subnet as the root router. For example, the IP address of the root router is 192.168.1.1, the IP address of the extended router should be from 192.168.1.2 to 192.168.1.254.). 3. Go to Advanced > Wireless > Advanced Settings page and select the wireless network 5GHz. Locate the WDS (5GHz) section and select the checkbox to enable the WDS Bridging function. 4. Click Survey to scan all the AP devices and choose the root AP to be bridged. 101