TP-Link Archer D20 Archer D20 V1 User Guide - Page 84
Check the VPN connection. You can ping site B' LAN IP, Pre-Shared Key, Perfect Forward Secrecy
View all TP-Link Archer D20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Chapter 12 Specify Your Network Settings 8 ) Enter the Pre-Shared Key for IKE authentication. Then keep Perfect Forward Secrecy enabled. Note: The key should consist of visible characters without blank space. Make sure Site A and Site B use the same key. 9 ) Leave the Advanced Settings as default value. Then click OK to save. 3. Configuration on Site B (remote network). Refer to step 2 configuration on Site A and make sure that Site A and Site B use the same pre-shared keys and Perfect Forward Secrecy settings. 4. The Status column will change to UP if the VPN connection has been set up successfully. 5. Check the VPN connection. You can ping site B' LAN IP from your computer in site A to verify that the IPSec VPN connection is set up correctly. Tips: To check the VPN connection, you can do the following. On the host in Site A, press [Windows Logo] + [R] to open Run dialog. Input"cmd" and hit OK. a . In the CLI window, type in"ping 192.168.2.x"("192.168.2.x" can be IP address of any host in Site B). Then press [Enter]. 80