Home » TP-Link Manuals » Bridges & Routers » TP-Link Archer D20 » Manual Viewer

TP-Link Archer D20 Archer D20 V1 User Guide - Page 14

Method 1: Wired, Method 2: Wirelessly, Method 3: Use the WPS button - password

Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

Chapter 2 Connect the Hardware 1. Connect the ADSL line and power adapter. The electrical outlet shall be installed near the device and shall be easily accessible Power Adapter Phone Jack 1 Connect the ADSL splitter to the phone jack Modem Router ADSL Splitter 2 Connect the modem router to the ADSL splitter. Connect to the phone (Optional) 3 Turn on the modem router. 2. Connect your computer to the modem router. Method 1: Wired Connect your computer's Ethernet port to the LAN port on the modem router Archer D20 via the Ethernet cable. Method 2: Wirelessly Use the default SSID (Wireless Network Name) and Wireless Password printed on the product label of the modem router to connect wirelessly. Method 3: Use the WPS button Wireless devices that support WPS, including Android phones, tablets, most USB network cards, can be connected to your router through this method. (WPS is not supported by IOS devices.) Note: The WPS function cannot be configured if the wireless function of the router is disabled. Also, the WPS function will be disabled if your wireless encryption is WEP. Please make sure the wireless function is enabled and is configured with the appropriate encryption before configuring the WPS. 10

Section	Page
About This Guide	5
Get to Know About Your Modem Router	6
1. 1. Product Overview	7
1. 2. Main Features	8
1. 3. Panel Layout	9
1. 3. 1. Top View	9
1. 3. 2. The Back Panel	11
Connect the Hardware	12
2. 1. Position Your Modem Router	13
2. 2. Connect Your Modem Router	13
Log into Your Modem Router	16
Set Up Internet Connections	18
4. 1. Use Quick Setup Wizard	19
4. 2. Manually Set up an Internet Connection	19
4. 3. Set up an IPv6 Connection	20
4. 4. Test Internet Connectivity	22
Bandwidth Control	23
Network Security	27
6. 1. MAC Filtering	28
6. 2. Access Control	29
6. 3. IP & MAC Binding	31
IPTV	33
USB Settings	35
8. 1. Local Storage Sharing	36
8. 1. 1. Access the USB disk	36
8. 1. 2. Customize Your Settings	38
8. 2. Remote Access via FTP Server	41
8. 2. 1. Access the USB disk	41
8. 2. 2. Customize Your Settings	44
8. 3. Media Sharing	45
8. 3. 1. Access the USB disk	46
8. 3. 2. Customize Your Settings	47
8. 4. Printer Sharing	48
Parental Controls	53
Guest Network	57
10. 1. Create a Network for Guests	58
10. 2. Customize Guest Network Options	58
NAT Forwarding	60
11. 1. Share Local Resources in the Internet by Virtual Server	61
11. 2. Open Ports Dynamically by Port Triggering	62
11. 3. Make Applications Free from Port Restriction by DMZ	63
11. 4. Make Xbox Online Games Run Smoothly by UPnP	64
Specify Your Network Settings	66
12. 1. LAN Settings	67
12. 1. 1. Change the LAN IP Address	67
12. 1. 2. Use the Modem Router as a DHCP Server	67
12. 1. 3. Reserve LAN IP Addresses	68
12. 2. Wireless Settings	69
12. 2. 1. Specify Basic Wireless Settings	69
12. 2. 2. Use WPS for Wireless Connection	71
12. 2. 3. Schedule Your Wireless Function	73
12. 2. 4. View Wireless Information	74
12. 2. 5. Advanced Wireless Settings	75
12. 3. Set Up a Dynamic DNS Service Account	77
12. 4. Interface Grouping	77
12. 5. Create Static Routes	79
12. 6. Set up a VPN Connection	81
12. 7. Set Up the IPv6 Tunnel	85
12. 7. 1. Use the Public IPv6 Tunnel Service-6to4	85
12. 7. 2. Specify the 6rd Tunnel with Parameters Provided by Your ISP	86
Administrate Your Network	88
13. 1. Set System Time and Region	89
13. 2. Update the Firmware	90
13. 3. Back up and Restore Configuration Settings	90
13. 4. Change the Administrator Account	91
13. 5. Local Management	92
13. 6. Remote Management	93
13. 7. System Log	93
13. 8. Monitor the Internet Traffic Statistics	95
13. 9. CWMP Settings	96
13. 10. SNMP Settings	98
Appendix A: Specifications	100