TP-Link TD-VG3511 TD-VG3511 V1 User Guide - Page 64
Dial Plan, SIP Account Advanced
View all TP-Link TD-VG3511 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide ¾ Display Name: Assign a name for your account. This name is the Caller-ID you want to be displayed on your friend's display panel, which can let your friend easily know who is calling. Please note that special characters are not allowed. ¾ Authentication ID: Enter the name or number used for SIP Authorization with SIP Registrar. This value is provided by your service provider. If it's not provided, keep the default value. ¾ Password: This parameter, given by your service provider, holds the password used for authentication within VoIP SIP registrar. ¾ Registrar Address: Set the IP address of the SIP Registrar server, which is provided by your service provider. ¾ Registrar Port: Specify the port of the VoIP SIP registrar on which it will listen for register requests from VoIP device. ¾ SIP Proxy: Enter the SIP proxy if it's provided, or keep the default value. ¾ SIP Proxy Port: Enter the SIP proxy port if it's provided, or keep the default value. ¾ Outbound Proxy: Indicate the VoIP SIP outbound proxy server IP address. This parameter is very useful when VoIP device is behind a NAT, say the Modem Router you use connects to Internet by other device. Keep the default if it's not provided by your service provider. ¾ Outbound Proxy Port: Specify the port of the VoIP SIP outbound proxy on which it will listen for messages. Keep the default value if it's not provided by your service provider. SIP Account Advanced ¾ Preferred Receive Ptime: Ptime, short for packet time, refers to the time interval for a voice packet to be sent by the remote caller. The unit is ms (millisecond). Usually the default value 20ms is OK. ¾ Priority: Select a priority for this account. This priority is useful when more than one account is added in this Modem Router. ¾ Incoming Call Route: Select which line the incoming VoIP call will be routed to. • None: All incoming VoIP calls will be denied. • Phone 1/Phone 2: The incoming call will be routed to either Phone1 or Phone 2 randomly. • Idle: The incoming call will be routed to idle phone in priority. • All: The incoming call will be routed to both Phone1 and Phone 2 synchronously. ¾ MWI: MWI is short for Message Waiting Indicator. Enable this option, so there will be indications when voice message are received. ¾ Preferred Codec (1~4): Codec is known as Coder-Decoder which is used for data signal conversion. Each codec uses a different bandwidth and hence provides different levels of voice quality. The default codec settings are shown in the corresponding field for your reference. Preferred Codec1 owns the top priority. You can change the value if you are provided with this parameter; otherwise leave it default. 4.7.2 Dial Plan Choose "Voice"Æ"Dial Plan", you can see the next submenus: 55