Home » TP-Link Manuals » Bridges & Routers » TP-Link TD-W9977 » Manual Viewer

TP-Link TD-W9977 User Guide - Page 16

Test Internet Connectivity, 4. 4. Set Up an IPv6 Connection, Advanced, System Tools, Diagnostics

Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

Chapter 4 Set Up Internet Connections 4. 3. Test Internet Connectivity After manually setting up the Internet connection, you need to test the Internet connectivity. The modem router provides a diagnostic tool to help you locate the malfunction. 1. Visit http://tplinkmodem.net, and log in with the password you set for the modem router. 2. Go to Advanced > System Tools > Diagnostics page. 3. Click Start to test the Internet connectivity and you will see the test result in the gray box. 4. 4. Set Up an IPv6 Connection If your ISP has provided a DSL line that supports IPv6 connection as well as some detailed IPv6 parameters, you can manually set up an IPv6 connection. If your ISP provides an IPv4-only connection or IPv6 tunnel service, permit IPv6 connection by referring to Set Up the IPv6 Tunnel. Follow the steps below to set up an IPv6 connection: 1. Make sure you have set up an IPv4 connection by using Quick Setup wizard or manually before setting up an IPv6 connection. 2. Visit http://tplinkmodem.net, and log in with the password you set for the modem router. 3. Go to Advanced > Network > Internet page. 13

Section	Page
About This Guide	4
Get to Know Your Modem Router	5
1. 1. Product Overview	6
1. 2. Product Appearance	6
Connect the Hardware	9
2. 1. Position Your Modem Router	10
2. 2. Connect Your Modem Router	10
Log in to Your Modem Router	12
Set Up Internet Connections	14
4. 1. Use Quick Setup Wizard	15
4. 2. Manually Set Up an Internet Connection	15
4. 3. Test Internet Connectivity	16
4. 4. Set Up an IPv6 Connection	16
4. 5. Wireless Router Mode	17
Bandwidth Control	19
Network Security	23
6. 1. MAC Filtering	24
6. 2. Access Control	25
6. 3. IP & MAC Binding	27
IPTV	29
Parental Controls	31
Guest Network	35
9. 1. Create a Network for Guests	36
9. 2. Customize Guest Network Options	36
NAT Forwarding	38
10. 1. Share Local Resources in the Internet by Virtual Server	39
10. 2. Open Ports Dynamically by Port Triggering	40
10. 3. Free Applications from Port Restriction by DMZ	41
10. 4. Make Xbox Online Games Run Smoothly by UPnP	42
Specify Your Network Settings	44
11. 1. LAN Settings	45
11. 1. 1. Change the LAN IP Address	45
11. 1. 2. Use the Modem Router as a DHCP Server	46
11. 1. 3. Reserve LAN IP Addresses	47
11. 2. IPv6 LAN Settings	47
11. 2. 1. Configure the RADVD Address Type	48
11. 2. 2. Configure the DHCPv6 Server Address Type	48
11. 3. Wireless Settings	49
11. 3. 1. Specify Basic Wireless Settings	49
11. 3. 2. Use WPS for Wireless Connection	51
11. 3. 3. Schedule Your Wireless Function	52
11. 3. 4. View Wireless Information	53
11. 3. 5. Advanced Wireless Settings	54
11. 4. Set Up a Dynamic DNS Service Account	56
11. 5. Interface Grouping	56
11. 6. Create Static Routes	58
11. 7. Set up a VPN Connection	60
11. 8. Set Up the IPv6 Tunnel	64
11. 8. 1. Use the Public IPv6 Tunnel Service-6to4	64
11. 8. 2. Specify the 6rd Tunnel with Parameters Provided by Your ISP	65
Administrate Your Network	66
12. 1. Set System Time	67
12. 2. Update the Firmware	68
12. 3. Back up and Restore Configuration Settings	68
12. 4. Change the Administrator Account	69
12. 5. Local Management	70
12. 6. Remote Management	70
12. 7. System Log	71
12. 8. Monitor the Internet Traffic Statistics	73
12. 9. CWMP Settings	73
12. 10. SNMP Settings	75