Home » TP-Link Manuals » Bridges & Routers » TP-Link TD-W9977 » Manual Viewer

TP-Link TD-W9977 User Guide - Page 48

Con the RADVD Address Type, Advanced, Network, LAN Settings, RADVD, Site Prefix Type

Add to My Manuals
Save this manual to your list of manuals

Page 48 highlights

Chapter 11 Specify Your Network Settings 11. 2. 1. Configure the RADVD Address Type 1. Visit http://tplinkmodem.net, and log in with the password you set for the modem router. 2. Go to Advanced > Network > LAN Settings. 3. Select IPv6 to configure IPv6 LAN parameters. 1 ) Select the RADVD address type to make the modem router assign IPv6 address prefixes to hosts. Note: Do not select the Enable RDNSS and Enable ULA Prefix check boxes unless required by your ISP. Otherwise you may not be able to access the IPv6 network. For more information about RDNSS and ULA Prefix, contact our technical support. 2 ) Keep Site Prefix Type as the default value Delegated. If your ISP has provided a specific IPv6 site prefix, select Static and enter the prefix. 3 ) Keep Prefix Delegated WAN Connection as the default value. 4. Click Save to make the settings effective. 11. 2. 2. Configure the DHCPv6 Server Address Type 1. Visit http://tplinkmodem.net, and log in with the password you set for the modem router. 2. Go to Advanced > Network > LAN Settings. 3. Select IPv6 to configure IPv6 LAN parameters. 45

Section	Page
About This Guide	4
Get to Know Your Modem Router	5
1. 1. Product Overview	6
1. 2. Product Appearance	6
Connect the Hardware	9
2. 1. Position Your Modem Router	10
2. 2. Connect Your Modem Router	10
Log in to Your Modem Router	12
Set Up Internet Connections	14
4. 1. Use Quick Setup Wizard	15
4. 2. Manually Set Up an Internet Connection	15
4. 3. Test Internet Connectivity	16
4. 4. Set Up an IPv6 Connection	16
4. 5. Wireless Router Mode	17
Bandwidth Control	19
Network Security	23
6. 1. MAC Filtering	24
6. 2. Access Control	25
6. 3. IP & MAC Binding	27
IPTV	29
Parental Controls	31
Guest Network	35
9. 1. Create a Network for Guests	36
9. 2. Customize Guest Network Options	36
NAT Forwarding	38
10. 1. Share Local Resources in the Internet by Virtual Server	39
10. 2. Open Ports Dynamically by Port Triggering	40
10. 3. Free Applications from Port Restriction by DMZ	41
10. 4. Make Xbox Online Games Run Smoothly by UPnP	42
Specify Your Network Settings	44
11. 1. LAN Settings	45
11. 1. 1. Change the LAN IP Address	45
11. 1. 2. Use the Modem Router as a DHCP Server	46
11. 1. 3. Reserve LAN IP Addresses	47
11. 2. IPv6 LAN Settings	47
11. 2. 1. Configure the RADVD Address Type	48
11. 2. 2. Configure the DHCPv6 Server Address Type	48
11. 3. Wireless Settings	49
11. 3. 1. Specify Basic Wireless Settings	49
11. 3. 2. Use WPS for Wireless Connection	51
11. 3. 3. Schedule Your Wireless Function	52
11. 3. 4. View Wireless Information	53
11. 3. 5. Advanced Wireless Settings	54
11. 4. Set Up a Dynamic DNS Service Account	56
11. 5. Interface Grouping	56
11. 6. Create Static Routes	58
11. 7. Set up a VPN Connection	60
11. 8. Set Up the IPv6 Tunnel	64
11. 8. 1. Use the Public IPv6 Tunnel Service-6to4	64
11. 8. 2. Specify the 6rd Tunnel with Parameters Provided by Your ISP	65
Administrate Your Network	66
12. 1. Set System Time	67
12. 2. Update the Firmware	68
12. 3. Back up and Restore Configuration Settings	68
12. 4. Change the Administrator Account	69
12. 5. Local Management	70
12. 6. Remote Management	70
12. 7. System Log	71
12. 8. Monitor the Internet Traffic Statistics	73
12. 9. CWMP Settings	73
12. 10. SNMP Settings	75