TP-Link TL-R480T User Guide - Page 22

TL-R480T, IP Address, Subnet Mask, Default Gateway, MTU Size, Primary DNS, Secondary DNS, Ingress - + default password

Get TP-Link TL-R480T PDF manuals and user guides
UPC - 696726480020
View all TP-Link TL-R480T manuals
Add to My Manuals
Save this manual to your list of manuals

Page 22 highlights

TL-R480T SMB Broadband Router User Guide Figure 4-5 ¾ IP Address - Enter the IP address in dotted-decimal notation provided by your ISP. ¾ Subnet Mask - Enter the subnet Mask in dotted-decimal notation provided by your ISP, usually is 255.255.255.0. ¾ Default Gateway - Enter the gateway IP address in dotted-decimal notation provided by your ISP (Optional). ¾ MTU Size - The normal MTU (Maximum Transmission Unit) value for most Ethernet networks is 1500 Bytes. For some ISPs you may need to modify the MTU. But this is rarely required, and should not be done unless you are sure it is necessary for your ISP connection. ¾ Primary DNS - Type the DNS address in dotted-decimal notation provided by your ISP (Optional). ¾ Secondary DNS - Type another DNS address in dotted-decimal notation provided by your ISP if provided (Optional). ¾ Ingress Bandwidth: Enter the bandwidth for ingress traffic. ¾ Egress Bandwidth: Enter the bandwidth for egress traffic. 3. PPPoE If you are given a user name and a password, please select PPPoE (shown in Figure 4-6). If you are not sure which connection type you use currently, please contact your ISP to obtain the 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
TL-R480T
SMB Broadband Router User Guide
16
Figure 4-5
¾
IP Address
-
Enter the IP address in dotted-decimal notation provided by your ISP.
¾
Subnet Mask
-
Enter the subnet Mask in dotted-decimal notation provided by your ISP,
usually is 255.255.255.0.
¾
Default Gateway
-
Enter the gateway IP address in dotted-decimal notation provided by your
ISP (Optional).
¾
MTU Size -
The normal MTU (Maximum Transmission Unit) value for most Ethernet
networks is 1500 Bytes. For some ISPs you may need to modify the MTU. But this is rarely
required, and should not be done unless you are sure it is necessary for your ISP
connection.
¾
Primary DNS -
Type the DNS address in dotted-decimal notation provided by your ISP
(Optional).
¾
Secondary DNS -
Type another DNS address in dotted-decimal notation provided by your
ISP if provided (Optional).
¾
Ingress Bandwidth:
Enter the bandwidth for ingress traffic.
¾
Egress Bandwidth:
Enter the bandwidth for egress traffic.
3.
PPPoE
If you are given a user name and a password, please select
PPPoE
(shown in Figure 4-6). If you
are not sure which connection type you use currently, please contact your ISP to obtain the