TP-Link TL-WA850RE TL-WA850RE V1 User Guide - Page 12

Basic Requirements, 2.3 Connecting the Device - range extender

Get TP-Link TL-WA850RE PDF manuals and user guides View all TP-Link TL-WA850RE manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

TL-WA850RE 300Mbps Universal Wireless N Range Extender User Guide 2.2 Basic Requirements  Place your Range Extender in a well-ventilated place far from direct sunlight, any heater or heating vent.  Leave at least 2 inches (5cm) space around the device for heat dissipation.  Turn off your Range Extender and unplug the power adapter in a lighting storm to avoid damage.  Use Web browser, such as Microsoft Internet Explorer 5.0 or above, Netscape Navigator 6.0 or above.  Operating temperature of the Range Extender should be 0℃~40℃ (32℉~104℉).  Operating humidity of the Range Extender should be 10%~90%RH (Non-condensing). 2.3 Connecting the Device Figure 2-1 Typical connection of TL-WA850RE To establish a typical connection of the Range Extender, please take the following steps: 1. Connect the Cable/DSL modem to a Wireless router with an Ethernet cable. 2. Plug your TL-WA850RE directly to a standard electrical wall socket, which is next to the Wireless router. 3. Connect your Wireless Clients (such as notebook, pad, smart phone, etc.) to TL-WA850RE wirelessly. Or you can connect your PC to the sole LAN port of Range Extender via an Ethernet cable. 4. Log in the web-based management page of TL-WA850RE and complete the configurations. (Please refer to Chapter 3 Quick Installation Guide or Chapter 4 Configure the Device for the configurations, as you need.) Through the web page configuration you can successfully connect TL-WA850RE to the wireless router. 5. Adjust an ideal location for TL-WA850RE. (Please refer to Section 2.1 Before You Begin for detailed information about ideal location.) 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
TL-WA850RE
300Mbps Universal Wireless N Range Extender User Guide
5
2.2
Basic Requirements
Place your Range Extender in a well-ventilated place far from direct sunlight, any heater or
heating vent.
Leave at least 2 inches (5cm) space around the device for heat dissipation.
Turn off your Range Extender and unplug the power adapter in a lighting storm to avoid
damage.
Use Web browser, such as Microsoft Internet Explorer 5.0 or above, Netscape Navigator 6.0
or above.
Operating temperature of the Range Extender should be 0
℃
~40
℃
(32
℉
~104
℉
).
Operating humidity of the Range Extender should be 10%~90%RH (Non-condensing).
2.3
Connecting the Device
Figure 2-1 Typical connection of TL-WA850RE
To establish a typical connection of the Range Extender, please take the following steps:
1.
Connect the Cable/DSL modem to a Wireless router with an Ethernet cable.
2. Plug your TL-WA850RE directly to a standard electrical wall socket, which is
next to
the
Wireless router.
3.
Connect your Wireless Clients (such as notebook, pad, smart phone, etc.) to TL-WA850RE
wirelessly. Or you can connect your PC to the sole LAN port of Range Extender via an
Ethernet cable.
4.
Log in the web-based management page of TL-WA850RE and complete the configurations.
(Please refer to
Chapter 3 Quick Installation Guide
or
Chapter 4 Configure the Device
for the
configurations, as you need.) Through the web page configuration you can successfully
connect TL-WA850RE to the wireless router.
5.
Adjust an ideal location for TL-WA850RE. (Please refer to Section
2.1 Before You Begin
for
detailed information about ideal location.)