TRENDnet TEW-303PI Manual - Page 15
Power Mode, 4X Config., Apply, Link Info. - chipset
View all TRENDnet TEW-303PI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
the PSDU. The Short Preamble and header may be used to minimize overhead and, thus, maximize the network data throughput. However, the Short Preamble is supported only from the IEEE 802.11b (High-Rate) standard and not from the original IEEE 802.11. That means that stations using Short-Preamble cannot communicate with stations implementing the original version of the protocol. Power Mode: There are 3 modes to choose from l Continuous Access Mode (default) - the PCI Adapter is constantly operating with full power and it consumes the most power l Maximum Power Save - the PCI Adapter consumes the least power and only operates when there is wireless network activity. l Power Save - the PCI Adapter consumes the moderate level of power. 4X Config.: When "4X enable" is selected, you will be running 22Mbps PBCC+4X mode, the wireless transmission speed can achieve over 12Mbps real throughput assuming that the other wireless LAN devices are also running 22Mbps PBCC+4X. Note!: 4X mode is proprietary transmission mode available only with our solution chipset. In order to achieve superb speed by 4X or 22Mbps PBCC mode, both the transmitting and receiving parties must be using our WLAN solution products. For the changes made to any of the items above to be effective, click "Apply". The screen will be changed back to Link Info. Page 15