TRENDnet TEW-303PI Manual - Page 31

Checking IP Address of Your Computer In Windows XP

Get TRENDnet TEW-303PI PDF manuals and user guides View all TRENDnet TEW-303PI manuals
Add to My Manuals
Save this manual to your list of manuals

Page 31 highlights

Checking IP Address of Your Computer In Windows XP Sometimes you will need to know the IP address of the computer that you are using. For example, when you want to make sure that your computer is in the same network domain as that of your Access Point for you can configure and access the AP. Go to Start menu > Run > type "command" Click "OK" When the command prompt window appears, type command "ipconfig /all" and press Enter. This command will display the IP addresses of all the network adapters in your computer. In this case, the IP address of your network adapter is 192.168.1.2, which means your Access Point must have an IP address of 192.168.1.xxx in order for you to be able to access it. If the IP address is assigned by DHCP server on the network, there are chances you might have to release the IP and acquire it from DHCP server again. Here is how you do it. 31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
31
Checking IP Address of Your Computer In Windows XP
Sometimes you will need to know the IP address of the computer that you are using.
For example, when you want to make sure that your computer is in the same network
domain as that of your Access Point for you can configure and access the AP.
When the command prompt window appears, type command “ipconfig /all” and press
Enter.
This command will display the IP addresses of all the network adapters in your
computer.
In this case, the IP address of your network adapter is 192.168.1.2, which means your
Access Point must have an IP address of 192.168.1.xxx in order for you to be able to
access it.
If the IP address is assigned by DHCP server on the network, there are chances you
might have to release the IP and acquire it from DHCP server again. Here is how you
do it.
Go to
Start
menu >
Run
> type
“
command
”
Click “
OK
”