Toshiba 32PS10 Owners Manual - Page 10

Introduction / Getting started Note: If you watch black and white programmes when the Colour System mode is set to Auto, colour noise may appear on the screen. In this case select the appropriate Colour System (For the system of each country or region, refer to pages 13, 35). Switching off the TV 1 Press on the remote control or ! on the TV left side panel to switch to the standby mode. Notes: • When the TV will not be used for a long period of time, such as during vacation or travel, remove the power plug from the wall outlet. • The TV will automatically turn itself off after approximately 15 minutes if it is tuned to a vacant channel or a station that completes its broadcast for the day. This function does not work in external input or Blue screen Off mode. The TV will automatically turn itself off after approximately 2 hours if you do not operate the TV after turned on by on timer function. • If power is cut off while you are viewing the TV, the Last Mode Memory function turns on the TV automatically when power is applied again. If power is going to be off for a long time and you are going to be away from your TV, unplug the power cord to prevent the TV from turning on in your absence. Tuning the TV for the first time Before switching on the TV, put your decoder and media recorder to standby, if they are connected, and ensure that the aerial is connected. To setup the TV, use the buttons on the remote control as detailed on page 9. 1 Press the button. The Quick Setup screen will appear. This screen will appear the first time that the TV is switched on. Quick Setup Language English 2 Press  or  to select the menu language (English, Chinese (CS), Malay, Thai, Vietnamese, Russian, Arabic, Persian or French). 3 Press Q, to display the Location menu (- page 14). Press  or  to select Store or Home. For normal home use, select Home. Location To use the TV for displaying in a store showroom, please select [Store]. [Home] mode is recommended for normal use. Home Store mode: AutoView menu is not available. 4 Press Q to display the AutoView menu (- page 16). Press  or  to select Yes or No. AutoView AutoView mode automatically adjusts picture settings to suit ambient light conditions. Do you wish to enable AutoView mode? Yes 5 Press Q to display the Auto Signal Booster menu (- pages 13), and then  or  to select Yes or No. Auto Signal Booster Signal Booster boosts weak analogue broadcast signals. If you select [Yes], the TV will automatically set this feature to [On] or [Off] according to signal strength. Do you wish to enable automatic control? Yes Yes mode : This function performs automatic distinction of On or Off. 6 Press Q to display the Auto Tuning startup screen. Press Q to start the automatic search. Auto Tuning Progress 1% Found 0 When the automatic search is completed, the TV will automatically appear the Manual Tuning menu (- page 13). Manual Tuning Pos. 1 2 3 4 5 6 7 8 Label 7 Closing the Quick Setup menu, press EXIT. Note: The Quick Setup menu can also be display at any time from the SETUP menu. 10