Toshiba 32PS10 Owners Manual - Page 13

Introduction / Getting started Auto Tuning 1 From the SETUP menu, press  or  to select Auto Tuning. 2 Press Q to display the Auto Signal Booster menu (- page 10), press  or  to select Yes or No. 3 Press Q to display the Auto Tuning menu. Auto Tuning Previous settings will be Lost! Press EXIT for no change. Press OK key to start auto tune. 4 Press Q to start the automatic search. The search will begin for all available stations. 5 When the automatic search is completed, the TV will automatically appear the Manual Tuning menu. 6 Closing the Auto Tuning menu, press EXIT. Note: When you preset the channel which sound of broadcast transmission system adopts "M" system, the sound system may not be tuned correctly if the radio waves transmit badly. At that time, preset the channel by Manual Tuning. The countries such as Myanmar, Brazil, Chile, Colombia apply to this case. See page 35 for more details. Manual Tuning 1 From the SETUP menu, press  or  to select Manual Tuning. 2 Press Q to display the Manual Tuning menu. Press  or  to select the programme position you want to arrange. 3 Press Q to display the breakdown menu. Press  or  to select an item, then press  or  to select the item as shown below. Manual Tuning Position 0 1 B/G A 0 On A CE G BDF H A. Position selection B. System (Sound) (- page 35) C. Colour System (- page 35) A : Automatic (factory set), P : PAL, S : SECAM, 4 : NTSC 4.43 (MHz), 3 : NTSC 3.58 (MHz) If the colour of a certain channel is abnormal, the automatic colour system selection (A) may have malfunctioned, or sound system selection is wrong. In such a case, select another colour and/or sound system (- page 35). D. Position skip selection Press  or  to turn the position skip option on "8" or off "(". The position will then be skipped when you select channels with PU or Pu. The "8" mark will appear beside a position number when you use the Number button on the remote control. E. Channel search operation Press  to search up the band or  to search down the band. Press  or  repeatedly until your desired channel is displayed. When a station is found, it will be displayed. NEVER PRESS ANY OTHER BUTTONS WHILE THE SET IS TUNING. F. Manual Fine Tuning Press  or  until better picture and sound are obtained. G. Signal Booster If the receiving signal is weak/strong and the picture is noisy, the picture
may be improved when using this function. Press the  or  to turn the Signal Booster On or Off. H. Label Station labels appear under the programme position display each time you turn on the TV, select a channel, or press . To change or create station labels: 1) Press  or  repeatedly to select a character for the first space, then press  or . *(blank space) 2) Repeat step 1) to enter the rest of the characters. If you would like a blank space in the label name, you must choose a blank space from the list of characters. Press Q to store your settings. 13