Toshiba A20-S259 Maintenance Manual - Page 191

3 Tests and Diagnostics 3.26 SETUP 4. Peripheral Use this option to select the parallel port mode and hard disk mode. (a) Internal Pointing Device This option enables and disables the Touch Pad. Enabled Enables the Touch Pad. (Default) Disabled Disables the Touch Pad. (b) Parallel Port Mode The options in this tab are ECP and Standard Bi-directional. ECP Sets the port mode to Extended Capabilities Port (ECP). For most printers, the port should be set to ECP. (Default) Std. Bi-Direct. This setting should be used with some other parallel devices. (c) Hard Disk Mode Use this item to select the hard disk mode. Enhanced IDE (Normal) Select this mode when using an operating system that supports Enhanced IDE. (Default) Standard IDE Select this mode when using an operating system that does not support Enhanced IDE. NOTE: Formats for Enhanced IDE and Standard IDE are different, so if you change the setting, you will have to reformat the hard disk for the appropriate setting. 3-76 Satellite A20 Maintenance Manual (960-444)