Toshiba A20-S259 Maintenance Manual - Page 229

4.5 HDD 4 Replacement Procedures Installing the HDD To install the HDD, follow the steps below and refer to figures 4-4 to 4-6. CAUTION: Do not hold the HDD by its top and bottom flat surfaces. It may damage the HDD. 1. Fit the aluminum cover to the HDD. 2. Seat the HDD in the bracket. 3. Secure the HDD to the HDD bracket with the following screws. • M3×4 FLAT screw ×4 CAUTION: Do not apply pressure to the middle of the HDD pack. It may damage the HDD bracket. Hold the HDD by its corners. 4. Hold the HDD pack by its corners and insert the "A" side of the HDD bracket into the hole of the dent on the back of the computer first. Then lay the HDD pack in the dent and slide it to the connector of the computer to connect. Press to ensure a firm connection. 5. Seat the HDD cover and secure it with the following screw. • M2.5×6 FLAT HEAD screw ×1 Satellite A20 Maintenance Manual (960-444) 4-19