Toshiba A20-S259 Maintenance Manual - Page 287
LCD Module, Removing the LCD Module
View all Toshiba A20-S259 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 287 highlights
4 Replacement Procedures 4.28 LCD Module 4.28 LCD Module NOTE: Be careful not to apply pressure to the ICs along the edge of LCD module. The ICs are easily damaged. NOTE: For environmental reasons, do not throw away a malfunctioning LCD module (or FL). Please follow local ordinances or regulations for its disposal. Removing the LCD Module To remove the LCD Module, follow the steps below and refer to figures 4-40 and 4-41. 1. Remove the following screws securing the LCD module. • M2×5 SUPER FLAT screw ×4 2. Carefully rotate out the top of the LCD module to access the LCD cable. NOTE: When rotating the top of the LCD module, hold the corners of the LCD module. The top edge of LCD module is sensitive area. 3. (For SXGA+ models only) Remove the copper tape securing the LCD cable and glass tape. 4. Remove the grass tape securing the LCD cable. 4-70 Satellite A20 Maintenance Manual (960-444)