Toshiba A20-S259 Maintenance Manual - Page 273
System Board, Removing the System Board
View all Toshiba A20-S259 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 273 highlights
4 Replacement Procedures 4.21 System Board 4 Replacement Procedures 4.21 System Board Removing the System Board To remove the system board, follow the steps below and refer to figure 4-31. 1. Remove the following screws securing the plastic holder and the system board. • M2.5×6 FLAT HEAD screw ×3 Figure 4-31 Removing the System board 2. Lift up the system board from the DC-IN cable side and remove it. When removing, press slightly the left part of the rear frame ("A" in the figure) of the chassis outside. 3. Remove the modem jack. 4-56 Satellite A20 Maintenance Manual (960-444)
4 Replacement Procedures
4.21
System Board
4-56
Satellite A20 Maintenance Manual (960-444)
4
Replacement Procedures
4.21 System Board
Removing the System Board
To remove the system board, follow the steps below and refer to figure 4-31.
1.
Remove the following screws securing the plastic holder and the system board.
•
M2.5
×
6
FLAT HEAD screw
×
3
Figure 4-31 Removing the System board
2.
Lift up the system board from the DC-IN cable side and remove it. When removing, press
slightly the left part of the rear frame (“A” in the figure) of the chassis outside.
3.
Remove the modem jack.