Toshiba A20-S259 Maintenance Manual - Page 87
Procedure 2, Partition Check, Enter, FDISK, DIR C
View all Toshiba A20-S259 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
2.6 HDD Troubleshooting 2 Troubleshooting Procedures Procedure 2 Partition Check Insert the Toshiba MS-DOS system disk and restart the computer. Perform the following checks: Check 1 Type C: and press Enter. If you cannot change to the drive C, go to Check 2. If you can change to drive C, go to Check 3. Check 2 Type FDISK and press Enter. Choose Display Partition Information from the FDISK menu. If the drive C is listed, go to Check 3. If the drive C is not listed, return to the FDISK menu and choose the option to create a DOS partition on the drive C. Restart the computer from the Toshiba MS-DOS system disk. If the problem still exists, go to Procedure 3. Check 3 If the drive C is listed as active in the FDISK menu, go to Check 4. If the drive C is not listed as active, return to the FDISK menu and choose the option to set the active partition for the drive C. Restart the computer. If the problem still exists, go to Check 4. Check 4 Type DIR C: and press Enter. If the following message appears, go to Procedure 3. If contents of drive C are listed on the display, go to Check 5. Invalid media type reading drive C Abort, Retry, Fail? Check 5 Using the SYS command on the Toshiba MS-DOS system disk, install system files on the HDD. If the following message appears on the display, the system files have been transferred to the HDD. Restart the computer. If the problem still exists, go to Procedure 3. System transferred Satellite A20 Maintenance Manual (960-444) 2-37