Toshiba A20-S259 Maintenance Manual - Page 90
Procedure 5, Connector Check and Replacement Check, Troubleshooting Procedures, HDD Troubleshooting
View all Toshiba A20-S259 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
2 Troubleshooting Procedures 2.6 HDD Troubleshooting Procedure 5 Connector Check and Replacement Check The HDD or the system board may be disconnected or damaged. Disassemble the computer following the steps described in Chapter 4, Replacement Procedures and perform the following checks: Check 1 Make sure the HDD is firmly connected to PJ1800 on the system board. If the connection is loose, reconnect firmly and repeat Procedure 1. If there is still an error, go to Check 2. Check 2 The HDD may be damaged. Replace it with a new one following the instructions in Chapter 4. If the problem still exists, perform Check 3. Check 3 The system board may be damaged. Replace it with a new one following the instructions in Chapter 4. 2-40 Satellite A20 Maintenance Manual (960-444)