Toshiba A20-S259 Maintenance Manual - Page 242

4 Replacement Procedures 4.9 CPU Installing the CPU To install the CPU, follow the steps below and refer to figures 4-11 to 4-14. 1. Make sure the cam is in the open position. 2. Seat the CPU in the CPU socket. Make sure the alignment is exact to avoid damaging pins on the CPU. 3. Press the interposer gently with your fingers and turn the cam on the CPU socket to the lock position with a flat-blade screwdriver to secure the CPU. 4. Apply new grease on the CPU using a special syringe as shown in the following figure. Apply quarter of scale (0.25ml) of grease evenly on the CPU chip. When silicon grease is already applied to the CPU, wipe them off with a close in advance. CAUTION: When installing the CPU, apply new grease on the top of the CPU chip. When installing the fin, make sure the bottom of the fin covers the top of the CPU. CPU chip Figure 4-14 Applying new grease 4-32 Satellite A20 Maintenance Manual (960-444)