Toshiba PSA10C-05HVM User Manual - Page 116

HW Setup and Passwords Key FD After you set a password, you can create a Key FD (diskette). If you forget the user password, the Key FD lets you bypass the password function. It is a good idea to create more than one Key FD in case a Key FD is damaged or lost. To create a Key FD follow the steps below. 1. Turn off the computer's power. 2. Connect the diskette drive to a USB port on the computer. 3. Set a diskette's write-protect tab to the write enable position and insert the diskette in the drive. All data on the diskette will be destroyed. 4. Turn on the computer's power. Password= will be displayed on the LCD. 5. Enter the password. 6. Press the Tab key. Insert FD Ready (Y/N) will be displayed on the LCD. 7. Press Y. Remove FD press key will be displayed on the LCD. 8. Remove the diskette and press any key. Device Config Device Configuration This option lets you set the device configuration. All Devices Setup by OS BIOS sets all devices. Operating system sets devices that it can control. (Default) Parallel/Printer Some models are equipped with Parallel/Printer tab. This tab lets you set the Parallel Port Mode. Use the Windows Device Manager to make settings for the Parallel port. Parallel Port Mode The options in this tab are ECP and Standard Bi-directional. ECP Standard Bidirectional Sets the port type to Extended Capabilities Port (ECP). For most printers, the port should be set to ECP. (Default) This setting should be used with some other parallel devices. Satellite Pro A10 Series 7-4