Toshiba PSA10C-05HVM User Manual - Page 69
Using optical media drives, Loading discs
![]() |
View all Toshiba PSA10C-05HVM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Operating Basics Disconnecting 3 ½" diskette drive When you have finished using the diskette drive, follow the procedures below to disconnect it: 1. Wait for the indicator light to go out to make sure all diskette activity has stopped. If you disconnect the diskette drive or turn off the power while the computer is accessing the drive you may lose data or damage the diskette or the drive. 2. Click the Safety Remove Hardware icon on the Task Bar. 3. Click Diskette drive. 4. Pull the diskette drive connector out of the USB port. Using optical media drives The full-size drive provides high-performance execution of CD/DVD-ROM-based programs. You can run either 12 cm (4.72") CD/DVDs or 8 cm (3.15") CD without an adaptor. An ATAPI interface controller is used for CD/DVD-ROM operation. When the computer is accessing a CD/DVD, an indicator on the drive glows. Use the WinDVD 4 application to view DVD-Video discs. Refer also to the Writing CDs section for precautions on writing to CDs. Loading discs To load CD/DVDs, follow the steps below and refer to the figures below. 1. a. When the power is on, press the eject button to open the drawer slightly. Pressing the eject button Satellite Pro A10 Series 4-3
![](/manual_guide/products/toshiba-psa10c05hvm-user-manual-2585c8b/69.png)