Toshiba PSA10C-05HVM User Manual - Page 126
Installing memory module, Slide your fingernail or a thin object under the cover and lift it off.
![]() |
View all Toshiba PSA10C-05HVM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
Optional Devices Installing memory module Follow the steps below to install a memory module. 1. Set the computer to boot mode and turn off the power. 2. Remove all cables connected to the computer. 3. Turn the computer upside down and remove the battery pack (refer to Chapter 6, Power and Power-Up Modes). 4. Loose a screw securing the memory module cover. The screw is attached to the cover to prevent it from being lost. 5. Slide your fingernail or a thin object under the cover and lift it off. Removing the memory module cover 6. Lift one side of the insulator sheet and fit the module's connectors into the computer's connectors at about a 45 degree angle. Press the module carefully to ensure a firm connection. Do not touch the connectors on the memory module or on the computer. Debris on the connectors may cause memory access problems. You can install the main memory module in either slot. Satellite Pro A10 Series 8-5
![](/manual_guide/products/toshiba-psa10c05hvm-user-manual-2585c8b/126.png)