Toshiba PSLD8U-01F00Y User Manual - Page 147

L350/L350D Modem Problem Procedure Communication Make sure the computer's internal modem software can't initialize settings are correct. Refer to Phone and Modem modem Options in the Control Panel. You can hear a dial tone If the call is going through a PBX machine, make but can't make a call sure the communication application's tone dial detection feature is disabled. You can also use the ATX command. You place a call, but a Make sure the settings are correct in your connection can't be communications application. made After making a call you Make sure the tone or pulse selection in your can't hear a ring communications application is set correctly. Communication is cut off unexpectedly The computer will automatically cut off communication when connection with the carrier is not successful for a set time interval. Try lengthening this time interval. A CONNECT display is Check the error control setting in your quickly replaced by NO communications application. CARRIER You can also use the AT\N command. Character display In data transmission, make sure the parity bit and becomes garbled stop bit settings correspond with those of the during a communication remote computer. Check the flow control and communication protocol. You cannot receive an Check the rings before auto answer setting in an incoming call incoming call your communications application. You can also use the ATS0 command. If problems persist, contact your dealer. User's Manual 9-15