Toshiba Qosmio G50 PQG55C-05F039 Users Manual Canada; English - Page 164

AV functions 2. Connect the other end of the infrared transmitter cable to a set-top box. It is placed in front of the infrared receiver window on the set-top box to allow the Full size remote controller to be used to change channels. 3. Connect the end of coaxial cable (1) to the TV antenna port of your computer. Refer to Connecting the coaxial cable section in Chapter 4, Operating Basics, for details. 4. Connect the other end of the coaxial cable (1) to the Splitter Out port of a splitter. 5. Connect the end of the coaxial cable (2) to the Splitter In port of a splitter. 6. Connect the other end of the coaxial cable (2) to the Satellite Out port of a set-top box. 7. Connect the end of the CATV cable to the Satellite In port of a set-top box. 8. Connect the other end of the CATV cable to the wall socket. Wall socket CATV cable Satellite In port Infrared transmitter cable Satellite Out port Coaxial cable (2) Splitter In port Splitter Splitter Out port Set-top box Coaxial cable (1) Figure 8-17 Connection method for the computer and set-top box Media Center Environment Settings Activating Media Center for the first time 1. Activate Media Center. The setup screen appears. Configure settings according to your environment. Follow the screen instructions and configure settings according to the environment used. Changing settings Refer to the following procedures to change settings that are already configured. 1. Activate Media Center. 2. Click in the following order: click Tasks -> settings -> TV -> Set Up TV Signal. User's Manual 8-17