Toshiba Satellite A110 Maintenance Manual - Page 129
Replacement Procedures, 10 Display Assembly, Removing the display assembly
View all Toshiba Satellite A110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
4 Replacement Procedures 4.10 Display Assembly 5. Remove two M2.5x6 screws securing display assembly to the top cover, then disengage the display assembly from the chassis. Figure 4-24 Removing the display assembly Installing the Display Assembly To install the display assembly, follow the steps below and refer to the figures in the preceding section. 1. Seat the display assembly taking care not to crush to the LCD power cable or wireless LAN antenna. 2. Secure two M2.5x6 black screws to each hinge on the topside. 3. Secure two M2.5x12 black screws to the computer's backside. 4. Connect the LCD power cable to the top chassis. 5. Thread the wireless LAN antennas back into their hole. 6. Replace the keyboard door. 4-24 [CONFIDENTIAL] Detroit 20 /Detroit 20E Series Maintenance Manual