Toshiba Satellite A110 Maintenance Manual - Page 130
Bluetooth, Replacement Procedures, Removing the Bluetooth module
View all Toshiba Satellite A110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
4.11 Bluetooth 4 Replacement Procedures 4.11 Bluetooth Removing the Bluetooth module To remove the Bluetooth module, first remove the keyboard as described in the preceding section and then follow the steps below: 1. Disconnect the antenna wire from the antenna connector. 2. Disconnect the Bluetooth FFC. 3. Remove two black M2x3 screws securing the Bluetooth module to the chassis. Figure 4-25 Removing the Bluetooth module Installing the Bluetooth module To install the Bluetooth module, follow the steps below and refer to the figures in the preceding section. 1. Seat the Bluetooth module on the chassis, then secure it with two black M2x3 screws. 2. Connect the Bluetooth FFC to the module. 3. Connect the antenna wire to the antenna connector. Detroit 20 /Detroit 20E Series Maintenance Manual [CONFIDENTIAL] 4-25