Toshiba Satellite A110 Maintenance Manual - Page 137
Thermal Module, Removing the Thermal Module
View all Toshiba Satellite A110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 137 highlights
4 Replacement Procedures 4.16 Thermal Module 4.16 Thermal Module Removing the Thermal Module To remove the thermal module, first remove the system board, then follow the steps below: 1. Remove four M2.5x3 screws from the thermal module. 2. Pry off the thermal module while being careful of the thermal grease. Figure 4-34 Removing the thermal module NOTE: After you remove the thermal module, you should use the CPU grease tool to remove the grease on the CPU and thermal module. Be sure to replace the thermal grease on the CPU when you reinstall it. Installing the Thermal Module To install the thermal module, follow the steps below and refer to the figures in the preceding section. 1. Restore the thermal grease to the top of the CPU. 2. Seat the thermal module, then secure it with four M2.5x3 screws. 4-32 [CONFIDENTIAL] Detroit 20 /Detroit 20E Series Maintenance Manual