Toshiba Satellite A40 Maintenance Manual - Page 108
Procedure 2, Connector Check and Replacement Check, Optical Drive Troubleshooting
View all Toshiba Satellite A40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
2.9 Optical Drive Troubleshooting 2 Troubleshooting Procedures Procedure 2 Connector Check and Replacement Check The Optical Drive is connected to the system board. The connectors may be disconnected from the system board or may be damaged. Disassemble the computer following the steps described in Chapter 4, Replacement Procedures and perform the following checks: Check 1 Make sure the Optical Drive is firmly connected to the system board. If the connection is loose, reconnect firmly and repeat Procedure 1. If there is still an error, go to Check 2. Check 2 The Optical Drive may be defective or damaged. Replace the drive with a new one. If there is still an error, go to Check 3. Check 3 Replace the system board with a new one following the steps in Chapter 4, Replacement Procedures. Satellite A40 Maintenance Manual (960-458) 2-49