Toshiba Satellite A40 Maintenance Manual - Page 293

4.26 Fluorescent lamp 4 Replacement Procedure 4 4.26 Fluorescent lamp This system uses LCD modules from the following suppliers. The procedure for replacing the fluorescent lamp is different for each LCD module. Refer to the appropriate procedure. Type 14.1 inch (XGA) Part No. VF2093P01 VF2058P01 15.0 inch (XGA) G33C00015110 G33C0000M110 G33C0000K110 G33C0000L110 G33C0000Q110 15.0 inch (SXGA+) G33C0000Q310 G33C0000R110 G33C0000P110 Supplier Chimei Samsung TMD Chimei LG.Philips Samsung Sharp Sharp LG.Philips Sharp Section 4.26.1 4.26.2 4.26.3 4.26.4 4.26.5 4.26.6 4.26.7 4.26.7 4.26.8 4.26.9 NOTE: - When working with a LCD module, always use a flat, grounded table. - Handle the backlight unit in the environment without dust, such as on the clean bench. Keep the worktable free from any screws or other material that may scratch the LCD surface. - Use an anti-static or protective sheet. - When replacing the FL unit, cover with a finger protector or similar to prevent soiling or scratching the LCD panel. - Be careful when handling the lamp. Excessive force may break the lamp. - Be careful not to soil or deform the lamp reflector. - Make sure that the power of the LCD module is turned off before connecting or disconnecting cables and connectors. Satellite A40 Maintenance Manual (960-458) 4-69