Toshiba Satellite A40 Maintenance Manual - Page 314
Replacing 14 Inch TMD fluorescent lamp 11
![]() |
View all Toshiba Satellite A40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 314 highlights
4 Replacement Procedure 4.26 Fluorescent lamp Fasten screws of the PCB and bezel 1. Fasten four screws on the left edge in the order (5), (6), (7), and (8) shown in Figure 4-73. 2. Fasten four screws on the right edge in the order (1), (2), (3), and (4) shown in Figure 473. CAUTION: Fasten the screws in the orders shown in Figure 4-73. No loose fastening is allowed. The tightening torque must not exceed 0.147N ?m (1.5kgf?cm) for all the eight screws. For the Philips screwdrivers, use an insert bit of point size 0. F?a?st(eMn2 Xth2e. e2 ig) 8h?t?M?2?×? 2.2 screws. 1 2 3 4 5 6 7 8 Figure 4-73 Replacing 14 Inch TMD fluorescent lamp (11) 4-90 Satellite A40 Maintenance Manual (960-458)
![](/manual_guide/products/toshiba-satellite-a40-maintenance-manual-8643ddd/314.png)
4
Replacement Procedure
4.26
Fluorescent lamp
4-90
Satellite A40 Maintenance Manual (960-458)
Fasten screws of the PCB and bezel
1.
Fasten four screws on the left edge in the order (5), (6), (7), and (8) shown in Figure 4-73.
2.
Fasten four screws on the right edge in the order (1), (2), (3), and (4) shown in Figure 4-
73.
CAUTION:
Fasten the screws in the orders shown in Figure 4-73. No loose fastening is
allowed.
The tightening torque must not exceed 0.147
N?
m (1.5kgf
?
cm) for all the
eight screws.
For the Philips screwdrivers, use an insert bit of point size 0.
8
7
6
5
2
3
4
1
Fasten the eight M2
×
2.2
screws.
Figure 4-73 Replacing 14 Inch TMD fluorescent lamp (11)