Toshiba Satellite A40 Maintenance Manual - Page 268
screw, glass tape, fan cable 1, PJ8450, fan cable 2, PJ8425, system board
![]() |
View all Toshiba Satellite A40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 268 highlights
4.17 System board/ Bat con cover 4 Replacement Procedures 2. Remove the following screw securing the system board. • M2.5×6B FLAT HEAD screw ×1 3. Peel off the glass tape and disconnect the fan cable 1 from the connector PJ8450 on the system board. 4. Peel of the glass tape and disconnect the fan cable 2 from the connector PJ8425 on the system board. 5. Lift up the system board to remove. System board Glass tape Fan cable 2 PJ8425 Fan cable 1 PJ8450 Glass tape M2.5×6B FLAT HEAD Figure 4-27 Removing the system board Satellite A40 Maintenance Manual (960-458) 4-47
![](/manual_guide/products/toshiba-satellite-a40-maintenance-manual-8643ddd/268.png)
4.17
System board/ Bat con cover
4 Replacement Procedures
Satellite A40 Maintenance Manual (960-458)
4-47
2.
Remove the following
screw
securing the system board.
•
M2.5
×
6B FLAT HEAD screw
×
1
3.
Peel off the
glass tape
and disconnect the
fan cable 1
from the connector
PJ8450
on the
system board.
4.
Peel of the
glass tape
and disconnect the
fan cable 2
from the connector
PJ8425
on the
system board.
5.
Lift up the
system board
to remove.
M2.5
×
6B FLAT HEAD
System board
Fan cable 1
Fan cable 2
Glass tape
Glass tape
PJ8450
PJ8425
Figure 4-27
Removing the system board