Toshiba Satellite A40 Maintenance Manual - Page 191
Alarm Time, Alarm Date Option, Ring Indicator, Enabled, Disabled, All Devices, Setup by OS
![]() |
View all Toshiba Satellite A40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 191 highlights
3 Tests and Diagnostics 3.23 SETUP For the Alarm Time, set the time to turn on the power automatically. The "second" cannot be set. When it is set to "Disabled", the time to turn on automatically is not set. For the Alarm Date Option, set the date to turn on the power automatically. When it is set to "Disabled", the time to turn on automatically is not set. The Ring Indicator is displayed only when the computer is in Resume mode and this function cannot be used for a PC card-type modem. When any modem is not installed, it is not displayed. NOTE: 1. Do not remove the AC adaptor and battery pack at the same time when you use this feature. If you do so, data saved by the resume function will be lost. You must also reset this option. 2. If you have set a password and the computer boots by the Auto Power On function and Resume is on, the computer will start with the instant security function enabled. The password = message is not displayed; however, you must enter the password to use the computer. 3. This option is enabled only once, the setting is reset, after booting up. (g) Panel Power On/Off This option is displayed in the resume mode. Enabled Disabled Enables the Panel Power On/Off. Disables the Panel Power On/Off. (Default) 8. Configuration This option lets you set the device configuration. All Devices Setup by OS BIOS sets all devices. Operating system sets devices that it can control. (Default) NOTE: When using installed OS, selecting "Setup by OS" is recommended. But, when setting "PC CARD-Controller Mode" to other than " Auto-Selected", select " All Devices". 3-64 Satellite A40 Maintenance Manual (960-458)
![](/manual_guide/products/toshiba-satellite-a40-maintenance-manual-8643ddd/191.png)