Toshiba Satellite A40 Maintenance Manual - Page 210
IEEE1394 test program, Tests and Diagnostics
![]() |
View all Toshiba Satellite A40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 210 highlights
3.28 IEEE1394 test program 3 Tests and Diagnostics 3.28 IEEE1394 test program This section describes how to perform the IEEE1394 test with the test program. NOTE: Use another computer that can communicate by IEEE1394 (i. Link) cable as a reference machine to perform this test. Toshiba MS-DOS is required to run the DIAGNOSTICS TEST PROGRAM. To start the DIAGNOSTIC TEST PROGRAM, follow these steps: Insert the Diagnostics disk in the floppy disk drive and turn on the computer. (The Diagnostics Disk contains the MS-DOS boot files.) The following menu will appear: * IEEE1394 [XXXXX] test menu ( For Repair ) V1.00 * * * * 1 ....IEEE1394 test * * * * 2 ....Responder tool * * * * 3 ....ID Check * * * .... Press test number[1-3] ? To execute the TEST, select the test number you want to execute and press Enter. Subtest 01 IEEE1394 test Specifies the data size and transfer speed between the responder connected with a responding cable, and sends and receives data. A dedicated cable for I-link is necessary. Subtest 02 Responder tool This program initializes the machine responder. Subtest 03 ID Check This program displays the GUID. Satellite A40 Maintenance Manual (960-458) 3-83
![](/manual_guide/products/toshiba-satellite-a40-maintenance-manual-8643ddd/210.png)