Toshiba Satellite Pro A210-EZ2201 Maintenance Manual - Page 113
LBA Start, LBA End, Percent, Time Limith, Time Limitm, Test Mode, Read & Write, Read Verify,
![]() |
View all Toshiba Satellite Pro A210-EZ2201 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
3.7 Storage 3 Diagnostic Programs LBA Start, LBA End--Specify the start and end byte in LBA (Large Block Address). Percent-Specify the coverage rate in percentage of the total disk. Time Limit(h): Choose or Input the time (hour) of the defined range of the total disk to be tested. Time Limit(m): Choose or Input the time (minute) of the defined range of the total disk to be tested. Test Mode-Choose test mode from the following options: (1) Read & Write -Write data on the disk, then read it out and compare the two value; (2) Read Verify -Read data only; (3) Unprotected Write-Write data on the disk without backup original data. Option-Select sequential test or random test 2. Sequential/Random Seek The test item is to check the correctness of the HDD's sector's seeking function. This test item involves the following parameters: IDE HDD Test Range-is same as the description of the upper item. LBA Start, LBA End-- specify start and finish byte in LBA(Large Block Address); Satellite A210/A215,Satellite Pro A210, EQUIUM A210,SATEGO A210 Maintenance Manual 41
![](/manual_guide/products/toshiba-satellite-pro-a210ez2201-maintenance-manual-36142bf/113.png)