Toshiba Satellite Pro A210-EZ2201 Maintenance Manual - Page 157
or replace the HDD pack only if it fails.
View all Toshiba Satellite Pro A210-EZ2201 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
4.2 HDD 4 Replacement Procedures 3. Remove the HDD pack by pulling on the tab attached to the pack, following the direction of the arrows. NOTE: Do not disassemble the HDD pack when it is working normally. Disassemble or replace the HDD pack only if it fails. 4. Place the HDD pack on a flat surface (such as a desk), and remove the two M3x4 black flat head screws with M3x4 black head screws. 5. Place the HDD pack on a flat surface (such as a desk), and remove the chassis. M3x4 black flat head screw HDD Chassis M3x4 black flat head screw HDD Figure 4-6 Removing the HDD chassis CAUTION: Do not apply pressure to the top or bottom of the drive. Satellite A210/A215/Satellite Pro A210/EQUIUM A210/SATEGO A210 Maintenance Manual 4-17
4.2 HDD
4 Replacement Procedures
3.
Remove the HDD pack by pulling on the tab attached to the pack, following the
direction of the arrows.
NOTE:
Do not disassemble the HDD pack when it is working normally.
Disassemble
or replace the HDD pack only if it fails.
4.
Place the HDD pack on a flat surface (such as a desk), and remove the two M3x4
black flat head screws with M3x4 black head screws.
5.
Place the HDD pack on a flat surface (such as a desk), and remove the chassis.
M3x4 black
flat head screw
HDD Chassis
HDD
M3x4 black
flat head screw
Figure 4-6 Removing the HDD chassis
CAUTION:
Do not apply pressure to the top or bottom of the drive.
Satellite A210/A215/Satellite Pro A210/EQUIUM A210/SATEGO A210
Maintenance Manual
4-17