Toshiba Satellite Pro A210-EZ2201 Maintenance Manual - Page 167
MDC Module
View all Toshiba Satellite Pro A210-EZ2201 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 167 highlights
4.6 MDC Module 4 Replacement Procedures 4.6 MDC Module Removing the MDC Module Remove the MDC Module (Modem Daughter Card) according to the following procedures and Figures 4-13, after checking that the computer is turned off in boot mode. CAUTION: Remove the MDC module after turning off the computer. If this is violated, the computer or MDC module can be damaged. 1. Remove the two M2x3 white bind screws securing the MDC module. 2. Left the MDC module and disconnect it from CN4 on the system board. 3. Disconnect the MDC cable from connector JP1 on the MDC card. CAUTION: Do not touch the connectors on the MDC module or in the computer. Contaminated connectors can cause MDC module failures. M2x3black bind screw P1 MDC card JP1 MDC cable CN4 Figure 4-13 Removing the MDC module Satellite A210/A215/Satellite Pro A210/EQUIUM A210/SATEGO A210 Maintenance Manual 4-27