Troy-Bilt Horse Tiller Operation Manual - Page 13
Controls & Features - wheel manual
View all Troy-Bilt Horse Tiller manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Controls & Features 4 Tines/PTO Clutch Lever Handlebar Height Adjustment Lever Wheels/Tines/PTO Drive Lever Forward Interlock Levers Depth Regulator Lever Wheel Speed Lever Figure 4-1 Tiller controls and features are described below and illustrated in Tines/PTO Clutch Lever Fig. 4-1. The Tines/PTO Clutch Lever is used to engage or disengage WARNING! Be familiar with all the controls and power to the transmission. their proper operation. Know how to stop the machine and disengage it quickly. Depth Regulator Lever NOTE: For detailed information on all engine controls refer to the The Depth Regulator Lever is used to regulate the tilling depth separate Engine Operator's Manual. of the tines. Wheels/Tines/PTO Drive Lever Handlebar Height Adjustment Lever Use the Wheels/Tines/PTO Drive Lever to engage and disengage The Handlebar Height Adjustment Lever is used to adjust the power to the transmission. handlebars to one of two heights. Forward Interlock Levers Engine Throttle Lever The Forward Interlock Levers are attached under the handlebar grip and will stop the engine if both levers are released. Use the throttle lever to adjust engine speed as well as to start and stop the engine. Wheel Speed Lever Keyswitch Starter (If So Equipped) The Wheel Speed Lever controls the speed at which the wheels spin. The keyswitch starter on electric start models is used to start, run and stop the tiller. 13