Uniden BC895XLT English Owners Manual - Page 17
Programming using AutoStore, All the banks begin flashing - reset
View all Uniden BC895XLT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
6. Press e to program the frequency into the channel you selected. SCAN MANUAL PRI TRUNK DATA L/O DELAY CTCSS 1 23 4 56 7 89 0E Programming using AutoStore To use this feature, you must set up a search range. Once the search begins, AutoStore will automatically program active frequencies into the available channels of the bank(s) you select. For more information about your scanner's search feature, see Searching on page 30. 1. Press m to stop scanning. 2. Using your keypad, enter the lower frequency of your search range. For example, enter 155.000 MHz. 3. Press i. 4. Using your keypad, enter the higher frequency of your search range. For example, enter 157.000 MHz. 5. Press i. 6. Press U. All the banks begin flashing and AUTO displays. 7. Select the bank(s) you want programmed during AutoStore. The bank indicators selected will stop flashing. If you select a bank with no available channels, FULL displays for two seconds before your scanner resets. You must either delete frequencies in the bank or select a different bank. 17