Uniden BC895XLT English Owners Manual - Page 22

Scanning, One Bank must always be active. You cannot deactivate all ten banks at the same - program

Get Uniden BC895XLT PDF manuals and user guides View all Uniden BC895XLT manuals
Add to My Manuals
Save this manual to your list of manuals

Page 22 highlights

Scanning 1. After programming frequencies, simply press s to begin scanning. 2. The bank indicators, A - J, selected for scanning appear in the display, while the bank being currently monitored flashes. You can deselect banks from active scanning by pressing their number on your keypad. The indicator for each deselected bank turns off, and the bank's channels are not scanned. Note: One Bank must always be active. You cannot deactivate all ten banks at the same time. If you try to turn all the banks off, the first bank is automatically selected. To restore a bank to active scanning, press the bank's number on your keypad. The bank's indicator will display again. 3. During normal scanning the scanner skips unprogrammed or locked out channels. SCAN 1 CHANNELS 2 3 4 5 6 7 8 9 10 4. When a transmission is received, the Scanner stops on that channel. When the transmission ends, scanning resumes automatically. 5. Press m to stop on a channel during scanning. Frequency Frequency not Locked Out entered (L/O) 6. Press s to resume scanning. 22

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
Scanning
1.
After programming frequencies, simply
press
s
to begin scanning.
2.
The bank indicators, A – J, selected for scanning appear in the display, while the bank being
currently monitored flashes. You can deselect banks from active scanning by pressing their
number on your keypad. The indicator for each deselected bank turns off, and the bank’s
channels are not scanned.
Note:
One Bank must always be active. You cannot deactivate all ten banks at the same
time. If you try to turn all the banks off, the first bank is automatically selected.
To restore a bank to active scanning, press the bank’s number on your keypad. The bank’s
indicator will display again.
3.
During normal scanning the scanner
skips unprogrammed or locked out
channels.
4.
When a transmission is received, the
Scanner stops on that channel. When the
transmission ends, scanning resumes
automatically.
5.
Press
m
to stop on a channel during
scanning.
6.
Press
s
to resume scanning.
1
3
4
5
9
10
2
6
7
8
CHANNELS
Frequency not
entered
Frequency
Locked Out
(L/O)
SCAN
22