Uniden BC895XLT English Owners Manual - Page 27
Tape Recording Channel Communication, To program a channel for tape recording
View all Uniden BC895XLT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
3. Press and hold p for two seconds to designate this channel as your new Priority Channel. Two beeps indicate that the Priority Channel is changed. SCAN MANUAL PRI TRUNK DATA L/O DELAY CTCSS 1 23 4 56 7 89 0E Tape Recording Channel Communication You can set any channel for recording while scanning. Then, if your scanner stops on a channel you have designated for recording, the transmission and its time, as well as the channel number and frequency, are all recorded. However, before you can use this feature, you must connect a tape recorder to your scanner. For information about attaching a recorder to your scanner, see For use with an optional tape recorder on page 11. To program a channel for tape recording: 1. Use your keypad or Rotary Tuner to select the channel you want recorded. 2. Press x. LINE displays indicating that the channel will be recorded if you've connected a tape recorder to your scanner. Repeat these steps to select other channels for recording. To record a channel, press s. When your scanner stops on a channel which displays LINE, the channel is recorded. To turn the record feature off for a channel: 1. Use your keypad or Rotary Tuner to select the channel you do not want to record anymore. 2. Press x. LINE turns off and the channel will not be recorded. 27