Uniden BC895XLT English Owners Manual - Page 18

8. Press S to start AutoStore. You can press P to change the step increment during AutoStore. Press P until you select the increment you want. If you select the default step increment for the frequency band you're searching, the indicator stops flashing. AutoStore stops automatically when all available channels in the selected bank(s) have been programmed. 9. Press m to exit AutoStore and return to the manual mode. Note: If you want to exit AutoStore before all the available channels are programmed, you must press m twice. Transferring a Programmed Frequency Except for frequencies stored in priority channels, you can send any frequency to another channel by following these steps. You cannot transfer a frequency which is stored in a priority channel. Error will flash for two seconds and then your scanner resets. If you want to transfer the P frequency stored in a priority channel, you must designate another channel in the bank as the priority channel. For more information about Changing a Priority Channel, see page 26. 1. Select the channel with a frequency you want to assign to a different channel. 18