Uniden BC895XLT English Owners Manual - Page 26
Priority Scan, Changing the Priority Channel - won t turn on
View all Uniden BC895XLT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Priority Scan When Priority Scan is turned on, your scanner checks the priority channel every two seconds for activity. If a signal is present on the priority channel, your scanner monitors the channel until the transmission ends, then resumes normal scanning. You can designate one channel in each bank as a Priority Channel. To activate Priority Scan (in either the Manual or Scan Mode): 1. Press p. P Note: If you have locked out the priority channel, this message appears when you select Priority mode. P 2. Press p again at anytime to deactivate Priority Scan. Changing the Priority Channel You cannot eliminate the Priority Channel, but you can change it to any of the 30 available channels in each bank. 1. Press m. 2. Select a new Priority Channel. a. Enter the channel number. b. Then press m again. SCAbN MANUAL 1 23 PRI TRUNK DATA a 4 56 L/O DELAY CTCSS 7 89 0E 26