Uniden BC895XLT English Owners Manual - Page 36

Changing a CTCSS Tone, For information about sending a, frequency to another channel, see

Get Uniden BC895XLT PDF manuals and user guides View all Uniden BC895XLT manuals
Add to My Manuals
Save this manual to your list of manuals

Page 36 highlights

4. If a CTCSS tone is found, the tone begins flashing in the display. 5. Press e to program the tone with the frequency stored in the channel. - or - Send the frequency with its associated tone to another channel. For information about sending a frequency to another channel, see Transferring a Programmed Frequency on page 18. 6. Repeat Steps 2 - 4 to search for tones associated with other frequencies in the search range you set in Step 1. If you want to program tones for several frequencies during your search, follow these steps: After you program a frequency and a CTCSS tone into a channel, the CTCSS Tone Search Mode is canceled. To activate the CTCSS Tone Search Mode again, press and hold K until you hear two short beeps. If you decide to cancel the CTCSS Tone Search Mode while you are searching for frequencies, press and hold K until you hear two short beeps and the CTCSS indicator turns off. Changing a CTCSS Tone 1. Press K to activate the CTCSS mode. 2. Select the channel you want to change. 3. Press e. The CTCSS tone begins flashing. 36

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
4.
If a CTCSS tone is found, the tone begins
flashing in the display.
5.
Press
e
to program the tone with the
frequency stored in the channel.
— or —
Send the frequency with its associated
tone to another channel.
For information about sending a
frequency to another channel, see
Transferring a Programmed Frequency
on page 18.
6.
Repeat Steps 2 – 4 to search for tones
associated with other frequencies in the
search range you set in Step 1.
If you want to program tones for several frequencies during your search, follow these steps:
After you program a frequency and a CTCSS tone into a channel, the CTCSS Tone Search
Mode is canceled. To activate the CTCSS Tone Search Mode again, press and hold
K
until you hear two short beeps.
If you decide to cancel the CTCSS Tone Search Mode while you are searching for
frequencies, press and hold
K
until you hear two short beeps and the
CTCSS
indicator
turns off.
Changing a CTCSS Tone
1.
Press
K
to activate the CTCSS mode.
2.
Select the channel you want to change.
3.
Press
e
.
The CTCSS tone begins flashing.
36